Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Scientists Shine a Laser Through a Human Head

The possible path of 50 photons sent through a human head from a laser [left, in red] to a detector [right, green]. Credit: Extreme Light group/University of Glasgow For the most part, anyone who wants to see what’s going on inside someone else’s brain has to make a trade-off when...

OPW Clean Energy Solutions Showcases Advanced Cryogenic Solutions at Gastech Milan 2025

OPW Clean Energy Solutions (OPWCES) will highlight its latest cryogenic innovations at Gastech 2025, taking place September 9–12 at Fiera Milano in Milan, Italy. Visitors can meet the OPW CES team at Booth #O31 to explore technologies designed to support the expanding hydrogen, LNG, and industrial gas markets. The company...

The National Radio Astronomy Observatory (NRAO) and Associated Universities, Inc. (AUI) are launching a two-year initiative to design a next-generation radio telescope with capabilities far beyond existing observatories. Building on the success of the NSF’s Karl G. Jansky Very Large Array (VLA), the proposed array—called the next-generation Very Large Array (ngVLA)—will feature over 200 antennas spanning the US desert southwest and northern Mexico. This facility aims to advance our understanding of planets, galaxies, black holes, and fundamental physics. Credit: Bill Saxton, NRAO/AUI/NSF

NSF National Radio Astronomy Observatory and RIX Industries Join Forces to Revolutionize Cryogenic Cooling for the ngVLA Project

by RIX Industries Communications Team In a groundbreaking collaboration that could change the landscape of both scientific discovery and cryogenic technology, the U.S. National Science Foundation’s National Radio Astronomy Observatory (NSF NRAO) has teamed up with RIX Industries to develop cutting-edge cryogenic cooling solutions for the Next Generation Very Large...

A high precision accelerator cryomodule produced by Meyer Tool for use in a particle accelerator at Brookhaven National Lab. MTM’s fabrication expertise is trusted by national labs and quantum technology firms worldwide. Credit: Meyer Tool & Manufacturing, Inc.

Meyer Tool Builds the Impossible, Empowering Illinois Manufacturing

by Christian Cunningham, Meyer Tool & Manufacturing Inc. Meyer Tool & Manufacturing, Inc., a long-standing leader in cryogenic, pressure and vacuum technologies, has reached a major milestone in its growth journey. The Illinois Department of Commerce and Economic Opportunity (DCEO) recently approved the company for participation in the Manufacturing Illinois...

Figure 1: An artist's rendering of the COSI satellite. Credit: Northrop Grumman Systems Corporation

Goddard Goings

An insight into past, present and future cryogenic missions where the Cryogenics and Fluids Branch at NASA Goddard Space Flight Center had or has a significant role. by Mark Kimball, Ph.D., Cryogenics and Fluids Branch, NASA Goddard Space Flight Center Readers of this column may recall last year’s recounting of...

The LOXSAT payload undergoes environmental control testing at the Kennedy Space Center’s EMI Lab in November 2024. Credit: Eta Space

Eta Space Progresses Cryogenic Fluid Management Technology in Space, Energy and Beyond

by Leah Sudhir, Eta Space Eta Space is at the forefront of cryogenic fluid management (CFM) technology for the aerospace industry, continuously pushing the boundaries of innovation and expanding its customer base. Founded by Dr. William “Bill” Notardonato, who brings over 30 years of experience from NASA, the company has...

Latest in Defining Cryogenics

Joule-Thomson Effect

The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...

Current Leads

One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...

Multilayer Insulation

Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...

Separated layers of ice over a pipe

I want to know that why there are different layers of ice over a pipe carrying a cryogenic fluid, each layer separated with clear marks / lines? What do these layers signify?

Using nitrogen as a cryogen

Is it possible to achieve -200˚C using nitrogen as a cryogen?

CATEGORIES