Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

An Eiffage plant serving as a pilot site for the start-up Revcoo, in Haut-Lieu, northern France, June 24, 2025. SAMEER AL-DOUMY/AFP

Capturing CO₂ Through Cryogenics: Eiffage Pioneers New Technology to Decarbonize Its Industry

The installation, a metal tower 11 meters high, flanked by a container and two tanks, one for storing liquid nitrogen and the other for capturing carbon dioxide, could almost go unnoticed beside the two enormous lime kilns that continuously transform limestone, extracted from a quarry owned by Bocahut, into calcium...

Scientists Shine a Laser Through a Human Head

The possible path of 50 photons sent through a human head from a laser [left, in red] to a detector [right, green]. Credit: Extreme Light group/University of Glasgow For the most part, anyone who wants to see what’s going on inside someone else’s brain has to make a trade-off when...

OPW Clean Energy Solutions Showcases Advanced Cryogenic Solutions at Gastech Milan 2025

OPW Clean Energy Solutions (OPWCES) will highlight its latest cryogenic innovations at Gastech 2025, taking place September 9–12 at Fiera Milano in Milan, Italy. Visitors can meet the OPW CES team at Booth #O31 to explore technologies designed to support the expanding hydrogen, LNG, and industrial gas markets. The company...

The National Radio Astronomy Observatory (NRAO) and Associated Universities, Inc. (AUI) are launching a two-year initiative to design a next-generation radio telescope with capabilities far beyond existing observatories. Building on the success of the NSF’s Karl G. Jansky Very Large Array (VLA), the proposed array—called the next-generation Very Large Array (ngVLA)—will feature over 200 antennas spanning the US desert southwest and northern Mexico. This facility aims to advance our understanding of planets, galaxies, black holes, and fundamental physics. Credit: Bill Saxton, NRAO/AUI/NSF

NSF National Radio Astronomy Observatory and RIX Industries Join Forces to Revolutionize Cryogenic Cooling for the ngVLA Project

by RIX Industries Communications Team In a groundbreaking collaboration that could change the landscape of both scientific discovery and cryogenic technology, the U.S. National Science Foundation’s National Radio Astronomy Observatory (NSF NRAO) has teamed up with RIX Industries to develop cutting-edge cryogenic cooling solutions for the Next Generation Very Large...

A high precision accelerator cryomodule produced by Meyer Tool for use in a particle accelerator at Brookhaven National Lab. MTM’s fabrication expertise is trusted by national labs and quantum technology firms worldwide. Credit: Meyer Tool & Manufacturing, Inc.

Meyer Tool Builds the Impossible, Empowering Illinois Manufacturing

by Christian Cunningham, Meyer Tool & Manufacturing Inc. Meyer Tool & Manufacturing, Inc., a long-standing leader in cryogenic, pressure and vacuum technologies, has reached a major milestone in its growth journey. The Illinois Department of Commerce and Economic Opportunity (DCEO) recently approved the company for participation in the Manufacturing Illinois...

Figure 1: An artist's rendering of the COSI satellite. Credit: Northrop Grumman Systems Corporation

Goddard Goings

An insight into past, present and future cryogenic missions where the Cryogenics and Fluids Branch at NASA Goddard Space Flight Center had or has a significant role. by Mark Kimball, Ph.D., Cryogenics and Fluids Branch, NASA Goddard Space Flight Center Readers of this column may recall last year’s recounting of...

Latest in Defining Cryogenics

Cold Compressors

A common way to provide cooling below the normal boiling point of helium (4.2K) is to reduce the pressure above the bath of liquid helium, thus also reducing the bath’s equilibrium saturation temperature. For example, to produce a 1.8K bath of liquid helium, the saturation pressure has to be reduced...

Kapitza Conductance

Kapitza conductance refers to the heat transfer between a solid surface and a fluid that covers that surface. Fundamentally, it describes the inherent difficulty in transferring energy from a solid to the fluid covering the solid surface. This phenomenon was first observed by P. L. Kapitza in 1941 while studying...

Thermosyphons

A thermosyphon (or thermosiphon) is a device that transfers heat via natural convection in a fluid. The natural convection is driven by gravity with the colder, denser fluid flowing downhill and the warmer, less dense fluid flowing back up. Thus, thermosyphons connect an object to be cooled with a reservoir...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Resistance to embrittlement at low temperatures

Could anyone advise me about resistance to embrittlement at low temperatures for the alloys in subject, i.e. does the CF10M perform like the CF8M in the same cryogenic service (-215F)? Amara Maafi Amara.Maafi@bg-group.com

Need help with temperature dependent model

I am a fourth-year student at New Zealand University. My name is Xu Ke. I have a project to generate a temperature dependent model for inductor, capacitor and diode by using PLECS. PLECS is software which acts as a toolbox for MATLAB. In my models, the temperature is very low,...

In what form is water available in LN2?

Does anybody know in what form water is available in LN2? There probably is a block of ice in the bottom of the tank. But as water comes in many shapes, I can imagine snow or crystals floating free in the LN2. When water is available in LN2, could small...

Separating gases using cryogenics

We are looking for some consulting engineers who understand how to separate gases using cryogenics. We have a new process which takes biomass and converts it to 5 gases and we need to separate these gases into their pure forms. Thanks for your help. Malcolm Draper Energy Research Group LLC...

CATEGORIES