ADVERTISEMENT

SESAME Delivers Its First Light

Scientists at SESAME (Synchrotron-light for Experimental Science and Applications in the Middle East) recorded first monochromatic light through the XAFS/XRF spectroscopy beamline in November, signaling the start of the laboratory’s experimental program. The beamline, SESAME’s first to come on stream, delivers X-ray light that will be used to carry out...

FAST Electron Beam Achieves Milestone Energy

In November, a team at the Fermilab Accelerator Science and Technology (FAST) facility ramped up a beam of electrons to 300 million electronvolts, a double milestone event, according to the lab. For one, the beam surpassed the threshold needed to launch a new accelerator physics program at Fermi National Accelerator...

Argonne Welcomes GRETINA Back Home

A world-class gamma ray spectrometer called GRETINA has returned to Argonne National Laboratory (CSA CSM) for a second run expected to last 18 months. Scientists will use the instrument in conjunction with Argonne’s Fragment Mass Analyzer, where it will enable studies of nuclei at or near the proton drip line...

UTSW Releases First Atomic Structure From its Cryo-EM Facility

UT Southwestern Medical Center researchers have published a 3-D atomic structure of the ion channel found in mammals that is implicated in a rare, inherited neurodegenerative disease in humans. The work marks the first such structure determined using the university’s $17 million cryo-electron microscopy (cryo-EM) facility.

Novel Lenses Enable X-ray Microscopy with Record Resolution

Researchers at DESY have reported the creation of novel lenses that enable X-ray microscopy with record resolution. The new lenses consist of over 10,000 alternating layers of a new material combination—tungsten carbide and silicon carbide—that allowed the team to achieve a focus spot size with a diameter of less than...

ICC20 Accepting Abstracts for 2018 Conference

Abstract submission is now open for the 20th International Cryocooler Conference (ICC20), the premier global gathering on cryocooler technology. The meeting will feature oral and poster presentation sessions, plus CSA's Foundations of Cryocoolers short course.

ADVERTISEMENT

Cold Compressors

A common way to provide cooling below the normal boiling point of helium (4.2K) is to reduce the pressure above the bath of liquid helium, thus also reducing the bath’s equilibrium saturation temperature. For example, to produce a 1.8K bath of liquid helium, the saturation pressure has to be reduced...

Kapitza Conductance

Kapitza conductance refers to the heat transfer between a solid surface and a fluid that covers that surface. Fundamentally, it describes the inherent difficulty in transferring energy from a solid to the fluid covering the solid surface. This phenomenon was first observed by P. L. Kapitza in 1941 while studying...

Thermosyphons

A thermosyphon (or thermosiphon) is a device that transfers heat via natural convection in a fluid. The natural convection is driven by gravity with the colder, denser fluid flowing downhill and the warmer, less dense fluid flowing back up. Thus, thermosyphons connect an object to be cooled with a reservoir...

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Seeking alloy that keeps elastic property down to 10K

I am looking for a metal (alloy) that supports high temperatures (at least 1600K) and keeps its elastic property at low temperatures down to 10K. Rhenium is a good one because it does not become brittle. But it is quite expensive. Pure tungsten and molybdenum enter in the brittle regime...

Searching for a freezer that does not need electricity

I’m student of University of Barcelona. We do technical cryogenic research and we are searching for a cryogenic portable freezer that does not need electricity. We can’t find any company that offers something like this. The product we are looking for is the typical portable freezer for food or drinks...