Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

CEC/ICMC 2017 Conference Recap

Nestled against the coast of lake Monona in Madison WI, over 700 scientists and engineers from around the world bustled around the meeting rooms of Frank Lloyd Wright’s Monona Terrace from July 9-13, 2017, for the 21st joint Cryogenic Engineering and International Cryogenic Materials Conferences.

Flaw Uncovered in Modern Cryogenic Two-phase Flow Modeling

An investigation into popular thermal/fluid design codes begun as an exercise in curiosity by engineers at NASA Glenn Research Center and the University of Florida has uncovered an interesting flaw in modern cryogenic two-phase flow modeling.

Liquid Air Energy Storage: How Cryogenics Can Support a Greener Grid

The LAES system charges using an industrial air liquefier based on the Claude cycle used on the front end of existing air separation units. Electricity from the grid is used to produce liquid air at close to ambient pressure, thus avoiding the excessive cost of containing a high-pressure fluid in...

VNR Advances New Process to Ensure Reliability of Space-Flight-Critical Fasteners

In October 1989, while investigating the crash landing of United Flight 232 in Sioux City, the NTSB located the fan disk from the plane’s number two engine in a cornfield near Alta, Iowa. It was in two pieces, ripped apart, the agency later determined, when an undetected metallurgical defect resulted...

Chart Acquires VCT Vogel

On September 1, Chart Industries, Inc. (CSA CSM) announced its acquisition of VCT Vogel GmbH, a German firm servicing cryogenic and other mobile gas tank equipment and trucks. Founded in 2001, VCT has established itself as a provider of truck-mounted drive and control systems for the operation of cryogenic pumps...

New Director General at ESO

Xavier Barcons became the eighth director general of the European Southern Observatory on September 1, succeeding Tim de Zeeuw who had served since 2007. Barcons begins his tenure at an exciting time for ESO, as construction of its Extremely Large Telescope is progressing and it is set to see first...

Latest in Defining Cryogenics

Dewar

A dewar is a type of cryostat named after Sir James Dewar, the researcher who first developed the concept of a vacuum insulated container with silvered walls to reflect thermal radiation. Dewar was the first to liquefy hydrogen, and he created the device to store his discovery. The thermos bottle...

Stirling and Gifford-McMahon Cryocoolers

Stirling and Gifford-McMahon (GM) cryocoolers are two of the most commonly used cryocoolers in cryogenics. Both devices have a significant industrial base and operate at a wide range of temperatures and capacities. The thermodynamic cycles for both of these cryocoolers are quite similar. The Stirling cycle consists of a compressor,...

Liquefied Natural Gas (LNG)

A significant commercial application of cryogenics is the liquefaction, transport and storage of natural gas. Liquefied Natural Gas (LNG) is generally 95 percent methane with a few percent ethane and much lower concentrations of propane and butane. LNG liquefies at 111.6 K. Unlike many applications of cryogenics, the motivation for...

Latest in Cryo Central

Food Processing

Cryogenics and Food The industrial gas industry provides a host of products and services related to food. The various gases have useful and sometimes fascinating applications in food industry. “The food industry is not a homogenous industry. The needs of customers processing hamburger vs. poultry vs. strawberries vs. seafood, for...

Primary Standards

Elie K. Track Hypres, Inc. elie@hypres.com http://www.hypres.com/ Primary standards involve the exact definition and realization of units of measurement for various quantities, time, length, mass, voltage, resistance, current, etc. International agreements based on the latest scientific knowledge define those units, and their realizations vary depending on the unit itself. For...

Shrink Fitting

Robin A. Rhodes Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Shrink fitting, (or “compression fitting” as it is sometimes called), is a method used to insert a pin or bushing into a housing or other assembly requiring an extremely tight tolerance fit. It can be used as an alternative to...

Telecommunications

From the Winter 2004 issue of Cold Facts magazine The recent M-Calc IV — 4th Industry Assessment workshop discussing military and commercial applications for low-cost cryocoolers, held in November in San Diego, highlighted progress being made in cryogenics as applied in telecommunications. The reliability and long lifetime of projects now...

Latest in Ask the Experts

Benefit of cryotreatment of audio circuit boards and interconnecting cables

Does cryotreatment of audio circuit boards and interconnecting cables (copper, silver, gold) properly done, provide a permanent benefit?

Standards and codes for design of cryogenic equipment?

What standards and codes are used in the design of cryogenic equipment?

Cryogenic thermophysical property data

I am in search of information regarding cryogenic thermophysical property data, specifically, Thermal Conductivity, Thermal Expansion, Stiffness and Modulus, in the 20K range. My list of materials include: Ti-6AL-4V (ELI), Al 6061-T651, and Invar (36%, plus any other composition which might have data available). Other materials which would be helpful...

Issue with insulation for ventilation system

I am with the Goodrich Corporation, an Aerospace products manufacturer. We currently utilize a number of environmental chambers (LN2 based) for environmental type conformity testing.

CATEGORIES