Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

CEC/ICMC 2017 Conference Recap

Nestled against the coast of lake Monona in Madison WI, over 700 scientists and engineers from around the world bustled around the meeting rooms of Frank Lloyd Wright’s Monona Terrace from July 9-13, 2017, for the 21st joint Cryogenic Engineering and International Cryogenic Materials Conferences.

Flaw Uncovered in Modern Cryogenic Two-phase Flow Modeling

An investigation into popular thermal/fluid design codes begun as an exercise in curiosity by engineers at NASA Glenn Research Center and the University of Florida has uncovered an interesting flaw in modern cryogenic two-phase flow modeling.

Liquid Air Energy Storage: How Cryogenics Can Support a Greener Grid

The LAES system charges using an industrial air liquefier based on the Claude cycle used on the front end of existing air separation units. Electricity from the grid is used to produce liquid air at close to ambient pressure, thus avoiding the excessive cost of containing a high-pressure fluid in...

VNR Advances New Process to Ensure Reliability of Space-Flight-Critical Fasteners

In October 1989, while investigating the crash landing of United Flight 232 in Sioux City, the NTSB located the fan disk from the plane’s number two engine in a cornfield near Alta, Iowa. It was in two pieces, ripped apart, the agency later determined, when an undetected metallurgical defect resulted...

Chart Acquires VCT Vogel

On September 1, Chart Industries, Inc. (CSA CSM) announced its acquisition of VCT Vogel GmbH, a German firm servicing cryogenic and other mobile gas tank equipment and trucks. Founded in 2001, VCT has established itself as a provider of truck-mounted drive and control systems for the operation of cryogenic pumps...

New Director General at ESO

Xavier Barcons became the eighth director general of the European Southern Observatory on September 1, succeeding Tim de Zeeuw who had served since 2007. Barcons begins his tenure at an exciting time for ESO, as construction of its Extremely Large Telescope is progressing and it is set to see first...

Latest in Defining Cryogenics

Dewar

A dewar is a type of cryostat named after Sir James Dewar, the researcher who first developed the concept of a vacuum insulated container with silvered walls to reflect thermal radiation. Dewar was the first to liquefy hydrogen, and he created the device to store his discovery. The thermos bottle...

Stirling and Gifford-McMahon Cryocoolers

Stirling and Gifford-McMahon (GM) cryocoolers are two of the most commonly used cryocoolers in cryogenics. Both devices have a significant industrial base and operate at a wide range of temperatures and capacities. The thermodynamic cycles for both of these cryocoolers are quite similar. The Stirling cycle consists of a compressor,...

Liquefied Natural Gas (LNG)

A significant commercial application of cryogenics is the liquefaction, transport and storage of natural gas. Liquefied Natural Gas (LNG) is generally 95 percent methane with a few percent ethane and much lower concentrations of propane and butane. LNG liquefies at 111.6 K. Unlike many applications of cryogenics, the motivation for...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Thermal shock on steel cylinder when dropped into liquid nitrogen

We are a research team at the University of South Florida, studying the “thermal shock” on a steel cylinder when it is dropped into liquid nitrogen. We want to make sure that the thermocouple does not get influenced by the surrounding LN2. Any advice?

Getter materials to absorb out gassed materials?

Here’s one for the scientists: We would like to sell vacuum insulated pipe for high temperature fluid applications. Are there any good getter materials that we can place in the vacuum space of our VJP to absorb outgassed materials at elevated temperatures?

Data on Carbon Fibres Reinforced Plastic at temperatures between 4 and 300K.

I am looking for data on Carbon Fibres Reinforced Plastic at temperatures between 4 and 300K. I would appreciate it if someone could give me some hints on where to find it.

Design of cryostats and suspension mechanisms for insulation and cryostat shielding

I’m looking for information about the design of cryostats and suspension mechanisms for insulation and cryostat shielding.

CATEGORIES