CGA Announces New Process Safety Committee
In an email to its members, the Compressed Gas Association announced the formation of a new Process Safety Committee to address process safety concerns and gaps that affect the industrial gas industry.
ADVERTISEMENT
Six Things You Might Not Know About Hydrogen
October 8th is National Hydrogen and Fuel Cell Day. To celebrate, here are a few things you might not know about hydrogen and fuel cells.
Auguste Acquires Taylor-Wharton’s European Operations
Auguste Cryogenics SK s.r.o. has acquired Taylor-Wharton International’s European Operations, including a cryogenic pressure vessel manufacturing facility, Taylor-Wharton Slovakia s.r.o., and the related warehouse and office complex of Taylor-Wharton Germany GmbH. Auguste says all employees have been retained and that the facilities will continue to operate under the Taylor-Wharton brand...
XFEL Commissions New X-ray Laser
Engineers at European XFEL, a large international research facility with 11 European member countries, have begun commissioning a 3.4-km-long underground X-ray laser. When operational, the laser will generate extremely short and bright X-ray light flashes that will enable new views of the structure and fast processes of the nanocosmos. Applications...
2016 Nobel Prize in Physics Awarded
The Royal Swedish Academy of Sciences awarded the 2016 Nobel Prize in Physics to David J. Thouless, F. Duncan M. Haldane and J. Michael Kosterlitz, three laureates who have used advanced topological methods to study unusual phases of matter, such as superconductors, superfluids or thin magnetic films. Thanks to their...
Spallation Neutron Source Marks a Decade of Research
Oak Ridge National Laboratory (CSA CSM) celebrated a decade of research at its Spallation Neutron Source (SNS) with an event on September 22. The SNS features a linear accelerator and accumulator ring. It sent the first protons to its one-of-a-kind mercury target in April 2006 and over the last decade...
ADVERTISEMENT
Dewar
A dewar is a type of cryostat named after Sir James Dewar, the researcher who first developed the concept of a vacuum insulated container with silvered walls to reflect thermal radiation. Dewar was the first to liquefy hydrogen, and he created the device to store his discovery. The thermos bottle...
Stirling and Gifford-McMahon Cryocoolers
Stirling and Gifford-McMahon (GM) cryocoolers are two of the most commonly used cryocoolers in cryogenics. Both devices have a significant industrial base and operate at a wide range of temperatures and capacities. The thermodynamic cycles for both of these cryocoolers are quite similar. The Stirling cycle consists of a compressor,...
Liquefied Natural Gas (LNG)
A significant commercial application of cryogenics is the liquefaction, transport and storage of natural gas. Liquefied Natural Gas (LNG) is generally 95 percent methane with a few percent ethane and much lower concentrations of propane and butane. LNG liquefies at 111.6 K. Unlike many applications of cryogenics, the motivation for...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Presence of alloying elements in tool steels
I want to expand my knowledge of cryogenics in general and tool steels in particular. Specifically, I am keenly interested in learning about the presence of alloying elements in tool steels and how their presence in various combinations affects the performance of tool steels after cryogenic treatment.
Pros and cons of barcoding samples
I was wondering if I could ask for input on pros and cons of barcoding. We are in the process of trying to decide if we should start barcoding our samples and I’m just not sure if this is feasible for our organization. We have numerous sites all over the...
Purity level of helium gas stream in cryo plant purification system
I would like to know what the principal methods and the relative instrumentation to check the purity level of helium gas stream in the purification system of a common helium cryogenic plant are. What principles are these instruments based on? And what are their principal characteristics?
LN2 for cryopreservation through controlled rate freezing of samples
I am the cryogenic specialist for a stem cell bank in Greece. I am trying to find the minimum requirements (purity, humidity, etc.) of liquid nitrogen for cryopreservation through controlled rate freezing of biological samples.