Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Understanding Multilayer Insulation for Large Spacecraft Cryogenics and Upper Stages

The current exploration plan for NASA includes towing an asteroid into lunar orbit and having astronauts visit it to gain experience with new technologies and methodologies for human exploration of the solar system. While this mission does not need the super high thermal performing insulation of a Martian mission, it...

Cryogenic Safety for Space Launch Vehicles During Ground Operations

United Launch Alliance launches Atlas V from Cape Canaveral and Vandenberg Air Force launch facilities, and large quantities of cryogenic propellants are stored on-site. These propellants present leak, fire and explosion hazards throughout their handling, starting from the commercial transport trailers' arrival at the launch pad and continuing through storage...

Cryogenic Safety: An Introduction

The scope of cryogenics is vast, but in all its forms, cryogenics presents unique safety hazards, including issues associated with extreme cold, flammability, enhanced combustion due to the presence of liquid oxygen and oxygen displacement caused by gases boiling off from cryogenic liquids. Despite these hazards, if certain guidelines and...

Researchers characterize electron density wave in cuprates

A team led by researchers from the US Department of Energy's Brookhaven National Laboratory and Cornell University has characterized a key arrangement of electrons in a high temperature superconductor. The study, published in the October 26, 2015, online edition of Nature Physics, is the first to identify the atomic-scale origins...

Mattia Checchin earns first prize at SRF 2015 for poster on accelerator cavity work

Mattia Checchin, a PhD student at the Illinois Institute of Technology conducting his thesis research at Fermilab, won first prize for his poster on superconducting radio frequency (SRF) accelerator cavity performance at the recent 17th International Conference on Radio Frequency Superconductivity (SRF 2015) in Whistler, Canada.

New multi-SQUID device cuts costs, improves sensitivity

Physicists in the United Kingdom have built a multi-SQUID device that can operate at 77K, the boiling point of liquid nitrogen. According to research published in Applied Physics Letters, the new device outperforms the industry standard niobium/aluminium trilayer single-SQUIDS maintained at 4.2K. "Since our SQUID arrays operate at 77K using...

Latest in Defining Cryogenics

Liquid Hydrogen

Hydrogen becomes a liquid at 20K and 1 bar. Liquid hydrogen (LH2) is an important substance in industry, transportation and research. Industrial uses of hydrogen include applications in the electronics, glass, chemical and metal processing fields. In these applications, the hydrogen is generally used as a room temperature gas but...

Superconducting Radiofrequency Cavities

Superconducting radio frequency (SRF) cavities represent an important application of cryogenics and superconductivity. SRF cavities are a technology for accelerating charged particle beams via the transfer of radiofrequency (RF) energy to the beams via resonant structures. As such, they are frequently found in large particle accelerators used for scientific research....

Thermal Radiation Shields

Actively cooled thermal radiation shields are a common feature of cryostats whose lowest temperature is less than 77K. These shields, which typically operate at temperatures between that of LN2 and 40K, block thermal radiation from higher temperatures from reaching lower temperature cryogenic components or fluids. Since the heat radiated from...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Low temperature applications of titanium and alloys

For a technical presentation I would like to have some recommendations for low temperature applications of titanium and titanium alloys. Do you think you can help me?

Designing a liquid oxygen bath

I’m designing a Liquid Oxygen Bath to place composite coupons in the bath and soak 96 samples for intervals of 8 hours, 24 hours, 7 days, 21 days, 42 days, 62 days and 90 days.

School science projects involving cryogenics and metallurgy?

Can you recommend any school science projects that would involve cryogenics and metallurgy?

Metallic Salts Normally Used to Produce Ultra-Low Temperatures?

Regarding the method known as the Adiabatic Demagnetization of Paramagnetic Salts: What metallic salts are normally used to produce the ultra-low temperatures used for near-absolute-zero cryogenic research? Which salts are the most efficient? Which make the best cooling agents? And which are used most commonly by physicists? I am looking...

CATEGORIES