Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

CO2Meter’s Critical Gas Safety Solution

CO2Meter has long been recognized for its remote oxygen depletion safety alarm, which warns staff before they enter areas with dangerously low oxygen levels caused by pressurized gas leaks. Pressurizing a gas in a tank or cylinder provides a convenient way to transport and store it. Flower shops use helium cylinders...

Jefferson Lab Dedicates Niobium-Tin Particle Accelerator Prototype

More than 30 of the world’s most advanced particle accelerators rely on one technology: superconducting radio-frequency (SRF). This technology, typically powered by pure niobium metal, has seen recent advancements with the introduction of niobium-tin alloys, which promise greater efficiency. The US Department of Energy’s (DOE) Thomas Jefferson National Accelerator Facility...

Vacuum Barrier Corporation Enhances Customer Support Through Field Service Evolution

Vacuum Barrier Corporation (VBC) has long been recognized for its commitment to excellence in cryogenic systems and liquid nitrogen (LN2) solutions. Recently, the company has made significant strides in bolstering its customer support by establishing a dedicated department for reliability and technical support. Dana Muse, Reliability and Technical Support Manager,...

Argonne Empowers Female Energy Leaders

Argonne National Laboratory (CSA CSM) recently hosted 12 women leaders from Net Zero World partner countries for a two-week training program under the Climate Smart Women Energy Leaders (CSWEL) initiative. In collaboration with the U.S. Department of Energy’s (DOE) Net Zero World Initiative, the program aimed to equip participants with...

Continuous Cryogenic Pellet Injection System Developed for Tokamak Fueling

A continuous cryogenic pellet injection system for tokamak fueling has been developed by a joint research team from the Hefei Institutes of Physical Science of the Chinese Academy of Sciences. It overcame technical challenges related to cryogenic ice formation, pellet cutting and pellet launching. Cryogenic pellet injection is a cutting-edge technique...

Web Industries to Showcase Precision-Formatting Solutions at JEC World 2025

Aerospace structures, parts, and components Satellite, spacecraft, and launch cryogenic multi-layer insulation (MLI) Urban mobility and electric vertical takeoff and landing (eVTOL) aircraft Wind turbine blades Oil, gas, and hydrogen/carbon capture pipes Battery energy storage systems (BESS) The company’s contract services include high-speed slitting, rewinding, spooling, chopping, seaming, and laminating,...

Latest in Defining Cryogenics

Cold Compressors

A common way to provide cooling below the normal boiling point of helium (4.2K) is to reduce the pressure above the bath of liquid helium, thus also reducing the bath’s equilibrium saturation temperature. For example, to produce a 1.8K bath of liquid helium, the saturation pressure has to be reduced...

Kapitza Conductance

Kapitza conductance refers to the heat transfer between a solid surface and a fluid that covers that surface. Fundamentally, it describes the inherent difficulty in transferring energy from a solid to the fluid covering the solid surface. This phenomenon was first observed by P. L. Kapitza in 1941 while studying...

Thermosyphons

A thermosyphon (or thermosiphon) is a device that transfers heat via natural convection in a fluid. The natural convection is driven by gravity with the colder, denser fluid flowing downhill and the warmer, less dense fluid flowing back up. Thus, thermosyphons connect an object to be cooled with a reservoir...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Power requirement to liquefy hydrogen gas?

What is the power requirement to liquefy hydrogen gas?

Effect of cryogenic freezing on tone of bell?

I have been making bells for a few years out of Bell Bronze, 87% Copper. Would cryogenic freezing have any effect on the tone of a bell if I had it treated after casting? Your help would be appreciated.

Thermal conductivity of niobium, tantalum, lead, tin

I am interested in the thermal conductivity and other properties of low temperature superconductors. Specifically I am interested in materials like Niobium, Tantalum, Lead and Tin. Would you know of a publication that dealt with thermal properties in general and also gave specific data on these materials?

Could boxes of paper records be freeze-dried?

In the event of a disaster such as a flood, could boxes of paper records be freeze-dried? Could cryogenics help in the recovery efforts?

CATEGORIES