PIP-II to Advance Intense Particle Beam Physics
With the power of Proton Improvement Plan-II, Fermi National Accelerator Laboratory is planning to construct and operate the foremost facility in the world for particle physics utilizing intense beams.
ADVERTISEMENT
Pump Design and Operation Tips from DH Industries
Pumps and their efficiencies will increase the heat load of a closed loop cryogenic cooling system, so it is important that these pumps be as efficient as possible to minimize cost and supply use. Francesco Dioguardi, Martijn Donkers and Harrie Vermeulen of DH Industries provide pump design and operation tips...
Development of HTS CORC Cables for High Field Magnets and Advanced Power Transmission
Dr. Danko van der Laan, the 2014 Roger W. Boom awardee, discusses the development of high temperature superconductors (HTS) and their applications in high field magnets and advanced power transmission. He also explains an approach to cable ReBCO tapes called Conductor on Round Core (CORC™) cables, which feature layers of...
Superconductivity record bolstered by magnetic data
Nature reports that scientists in Germany have observed the common molecule hydrogen sulfide superconducting at a record-breaking 203K (-70°C) when subjected to very high pressures. Researchers A. P. Drozdov, M. I. Eremets, I. A. Troyan, V. Ksenofontov and S. I. Shylin report their findings in their paper "Conventional superconductivity at...
JSAP publishes inaugural issue of the JSAP Bulletin
The Japan Society of Applied Physics (JSAP) has published the first issue of the new JSAP Bulletin, a tri-annual online publication designed to highlight JSAP's activities and inspire a global audience engaged in academic and industrial research.
Fermilab Accelerator Division demonstrates Booster Neutrino Beamline operations
After five months of repairing and retooling the Booster Neutrino Beamline (BNB), members of the Accelerator Division at Fermi National Accelerator Laboratory successfully delivered beam to the BNB on June 22. The previous horn, BNB-2, was found to be inoperable in January when it was determined its cooling was no...
ADVERTISEMENT
Refrigerators and Liquefiers
Two of the most common terms used in cryogenics are “refrigerator” and “liquefier.” These terms describe similar and, as will be seen, in some cases identical components. A refrigerator provides cooling (that is, absorbs heat) at cryogenic temperatures. Refrigerators typically put a working fluid (such as helium) through one of...
Air Separation
Air separation is one of the largest, as well as earliest, industrial applications of cryogenics. In this process, cryogenic temperatures are used to separate air into its constituent gases: nitrogen (78.08%), oxygen (20.95%), argon (0.93%) and carbon dioxide (0.3%). Trace gases such as krypton, neon, xenon and helium total far...
Coefficient of Performance and Figure of Merit
The coefficient of performance (COP) is used to describe the effectiveness of refrigerators, including those operating at cryogenic temperatures. The COP is defined as the amount of heat removed at the cryogenic operating temperature of the refrigerator divided by the amount of work that must be applied to remove the...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Data on thermal expansion down to 40K
For our cold mechanics, we use ball bearings from ADR from stainless steel which is AISI 440C, DIN X105CrMo17, W.Nr. 1.4125. Does anyone know the data of thermal expansion of this material down to 40 K?
Difference between radar and servo gauge for LNG tanks?
What is the difference between radar and servo gauge for LNG tanks? How do I understand the gauging system for LNG tanks and choose the best one?
Materials for "cryogenics in spacetech"?
I had to take a seminar in a national competition that is to be held in our country on the topic “cryogenics in spacetech.” For this, I need some materials related to it, and I thought to approach you for help. Can you suggest some relevant materials?
Information on how the emissivity of the panel changes with air fouling?
I work at a facility with a large thermal vacuum chamber. We are using both nitrogen and helium shrouds.