Ready to launch the prototype: HTS current leads for ITER
High Temperature Superconductor (HTS) current leads are the components that transmit the large currents from room-temperature power supplies to very low-temperature superconducting coils.
ADVERTISEMENT
High-tech storage holds the key to preserving plant life
About half the world's plant species are estimated to be under threat of extinction, and Australia is home to 14 percent of them. It is now hoped a cryogenic storage unit can protect Australia's native plants forever.
Bestobell supplies valves for first US LNG flag vessel
The first US flag vessel to be operated on liquefied natural gas uses valves supplied by Bestobell Valves (CSA CSM). Globe and check valves were supplied as part of the LNGPac fuel system through the company’s preferred supplier agreement with Wärtsilä Gas Power Systems (GPS).
Scientists create first computer-designed superconductor
A Binghamton University scientist and his international colleagues report on the successful synthesis of the first superconductor designed entirely on the computer. Their findings were published in Physical Review Letters.
Higgs, Englert Win Nobel for Particle Mass Discoveries
On October 8 François Englert of Belgium and Peter Higgs of Britain were awarded the 2013 Nobel Prize in physics for their theoretical discoveries on how subatomic particles acquire mass.
VIDEO: A guided tour around the CLIC test facility
The Compact Linear Collider (CLIC) is a study for a future accelerator that will reach unprecedented energies for electrons and their antimatter twins, positrons.
ADVERTISEMENT
Regenerators
Regenerators or regenerative heat exchangers are a key component of cryocoolers such as pulse tube cryocoolers (Cold Facts, August 2014). Regenerator performance greatly affects the coefficient of performance of cryocoolers. Improvements in regenerator design and, in particular, regenerator materials have been an important factor in the improvement of the performance...
Pulse Tube Cryocoolers
The development of pulse tube cryocoolers has been a significant topic of research and development over the past 20 or so years. Pulse tube cryocoolers have a number of advantages over other types of cryocoolers and are now available commercially. In order to understand pulse tube cryocoolers, it’s best to...
Thermal Expansion
Thermal expansion refers to the change in size (length or volume) that a material undergoes as its temperature changes. In cryogenic systems this effect can be quite large and must be allowed for in the design. In isotropic materials, which include most engineering materials, the thermal expansion is the same...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Effect of cryogenic freezing on tone of bell?
I have been making bells for a few years out of Bell Bronze, 87% Copper. Would cryogenic freezing have any effect on the tone of a bell if I had it treated after casting? Your help would be appreciated.
Thermal conductivity of niobium, tantalum, lead, tin
I am interested in the thermal conductivity and other properties of low temperature superconductors. Specifically I am interested in materials like Niobium, Tantalum, Lead and Tin. Would you know of a publication that dealt with thermal properties in general and also gave specific data on these materials?
Could boxes of paper records be freeze-dried?
In the event of a disaster such as a flood, could boxes of paper records be freeze-dried? Could cryogenics help in the recovery efforts?