Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

The Next Niobium Goal: Medium-Field SRF Cavities with High Quality Factor

In his guest column, Dr. Lance Cooley writes, "We are now beginning to evolve our present knowledge about producing high-gradient cavities to take on goals of high-Q CW cavities. The starting point for this transition is clearly to explore simple adaptations of the present ILC process. But it is not...

American College of Cryosurgery Holds Annual Meeting

The American College of Cryosurgery, founded in 1977, hosted its first meeting January 2-7, 2013, after a hiatus of nearly ten years. The meeting venues provided a unique experience for participants and accompanying guests. A land-based session was held at the Hyatt Regency Downtown Miami Hotel.

Donnelly Team Designs Cryogenic Remediation of Power Pollutants

Professor John M. Pfotenhauer writes, "The fields of low temperature physics and energy and environment do not frequently interact. Imagine my astonishment to find in the 2010 spring edition of a newsletter from the Department of Physics at my graduate school, the University of Oregon, that my thesis advisor from...

Cryo Community Mourns Donna Jung, International Cryogenics

It is with great regret that we report the sudden death of Donna Jung, President of International Cryogenics, on February 1, 2013. Jung was a leader in the cryogenic community, president of a longtime CSA Corporate Sustaining Member company, and a stalwart supporter of the Society. Jung, 52, was one...

New question in “Ask the Experts”: Design length of transition tubes

The question is: Are there any rules of thumb for the design length of transition tubes in order to prevent condensation at the room temperature end?

Rules of thumb for the design length of transition tubes

Are there any rules of thumb for the design length of transition tubes in order to prevent condensation at the room temperature end? By “transition tube,” I mean some standard size (O.D. and wall thickness) type 304 stainless steel tube with either 4 K or 80 K at one end...

Latest in Defining Cryogenics

Dilution Refrigerators

Dilution refrigerators are a common technique for reaching temperatures below 1K, particularly where continuous cooling at these temperatures is required. Helium exists in two stable isotopes: 4He and 3He. Naturally occurring 3He is extremely rare, constituting less than 1 part per million of helium gas. However, 3He can be manufactured,...

Oxygen Deficiency Hazards

Oxygen Deficiency Hazards (ODH) are a significant safety issue in cryogenic facilities. ODH occurs when inert gases such as nitrogen, helium or argon displace room air and thus lower the percentage of oxygen in the space below that required for human life. OSHA defines an area as oxygen deficient if...

Kelvin Temperature Scale

The Kelvin temperature scale is the principal temperature scale used in cryogenics and science. The kelvin is also one of the seven base units in the Système International d’Unités (SI) and is the unit of thermodynamic temperature. Thermodynamic temperature is a fundamental physical quantity (like mass, length or electrical current)...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Power usage: cryogenic systems vs. regular refrigerators

A recent project highlighted to me that closed cycle cryogenic cooling systems use far more electrical power to reduce temperatures by a few watts than regular refrigerators. I am sure it must be something to do with the extra difficulty of removing the heat from the liquid nitrogen or similar...

Redundancy strategies for mechanical -80C freezers

I was wondering what kind of redundancy strategies are people using for their mechanical -80C freezers? I am aware of the following. Please add if you are doing something different. 1) 1 Backup freezer for every 10 freezers – Empty and maintained at -80C at all times 2) Backup C02...

Safety guidelines for handling cryo vessels of nitrogen

I am looking for any safety guidelines for handling cryogenic vessels of nitrogen indoors and outdoors. I am especially interested in recommendations for area monitors to detect leaks, flow detection devices, etc.

Method to move components in a cryogenic environment

Does anyone know of a method with which to reliably move components in a cryogenic environment? We are interested in moving detectors in a cryogenically cooled (2K) vacuum chamber, which is contained within a larger cryostat/isolation vacuum with thermal shields. As the desired horizontal or vertical displacement is between 10...

CATEGORIES