ADVERTISEMENT

Booster 19 Rolls out to Masseys for Cryogenic Proof Testing

written by Ryan Weber  Following Booster 18’s failure during a pressure test, SpaceX went ahead and set a new record for stacking a booster in the Starship Program, to try and get Block 3 and the program at large back on track. And this weekend, crews rolled Booster 19 out to...

Provaris Delivers on First Phase LCO2 Tank Engineering and Design

By Dominic Ellison  Australian hydrogen and carbon dioxide storage and transport firm Provaris Energy has completed the phase-one delivery of an LCO2 tank front end engineering and design (FEED) program. The programme included detailed engineering and material and weld testing of a 25,000 cbm LCO2 low-pressure tank and class approval with...

New Partnership with Druck set for Major Breakthrough in Hydrogen-Powered Aircraft

The University of Bath has entered a Knowledge Transfer Partnership (KTP) with Druck, a Crane Company business, to develop the world’s first flight-certified cryogenic hydrogen pressure sensor, helping pave the way for net-zero aviation. Hydrogen is one of the most promising solutions to decarbonising air travel, with aviation currently accounting...

In Memoriam: Dr. Ray Radebaugh

It is with deep sadness that we share the passing of Ray Radebaugh. Ray was a pioneer, mentor, and friend whose influence on cryogenics spanned more than five decades and touched nearly every corner of our field. Ray’s passion for engineering began early. Growing up in Mishawaka, Indiana, he learned...

New Cryogenic Vacuum Chamber Cuts Noise for Quantum Ion Trapping

by John Toon, Georgia Institute of Technology Even very slight environmental noise, such as microscopic vibrations or magnetic field fluctuations a hundred times smaller than Earth’s magnetic field, can be catastrophic for quantum computing experiments with trapped ions. To address that challenge, researchers at the Georgia Tech Research Institute (GTRI)...

Remembering Bruce P. Strauss, a Steward of the Superconductivity Community

The superconductivity community has lost one of its most devoted stewards with the passing of Bruce P. Strauss, whose career spanned more than five decades and whose influence reached far beyond his own technical work. Bruce was not only a contributor to applied superconductivity; he was a builder of the...

ADVERTISEMENT

Cold Compressors

A common way to provide cooling below the normal boiling point of helium (4.2K) is to reduce the pressure above the bath of liquid helium, thus also reducing the bath’s equilibrium saturation temperature. For example, to produce a 1.8K bath of liquid helium, the saturation pressure has to be reduced...

Kapitza Conductance

Kapitza conductance refers to the heat transfer between a solid surface and a fluid that covers that surface. Fundamentally, it describes the inherent difficulty in transferring energy from a solid to the fluid covering the solid surface. This phenomenon was first observed by P. L. Kapitza in 1941 while studying...

Thermosyphons

A thermosyphon (or thermosiphon) is a device that transfers heat via natural convection in a fluid. The natural convection is driven by gravity with the colder, denser fluid flowing downhill and the warmer, less dense fluid flowing back up. Thus, thermosyphons connect an object to be cooled with a reservoir...

Cryogenic Electronics

Randall Kirschman, consulting physicist, Mountain View, California ExtElect@gmail.com Cryogenic electronics—the operation of electronic devices, circuits, and systems at cryogenic temperatures—has been a valuable technology for decades. Cryogenic electronics (also referred to as low-temperature electronics, or cold electronics) can be based on semiconductive devices, on superconductive devices, or on a combination...

Particle Physics: High Energy Physics

Cryogenics and High-Energy Physics 1. From symmetry magazine: http://www.symmetrymagazine.org/cms/?pid=1000627: Cryogenics is the study of how materials behave at temperatures near absolute zero. In high-energy particle accelerators, such frigid temperatures reduce the electrical resistance of wires in superconducting magnets, increasing the magnet strength and allowing faster particle acceleration. The same holds...

HTS Degaussing Systems

From the Spring 2009 issue of Cold Facts (Volume 25, Number 2): Thanks to a joint project by the US Navy and a number of industry partners, high temperature superconducting (HTS) technology is now at the heart of an advanced degaussing system aboard the USS Higgins at the naval station...

Magnetic Resonance Imaging

From http://www.superconductors.org: An area where superconductors can perform a life-saving function is in the field of biomagnetism. Doctors need a non-invasive means of determining what’s going on inside the human body. By impinging a strong superconductor-derived magnetic field into the body, hydrogen atoms that exist in the body’s water and...

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...