Hypres: Progress in SC RF for Telecommunications
Richard Hitt, President and CEO, Hypres Inc., and Dr. Elie Track, PhD, Senior Partner, discuss new progress in the use of Superconducting Radio Frequency (SC RF) techniques in telecommunications.
ADVERTISEMENT
Meyer Tool contributes to Alpha Project
Professors S. Y. Lee and Paul Sokol of the Indiana University Center for Exploration of Energy and Matter (IUCEEM) are currently leading the design effort of a multipurpose electron accelerator called the Alpha Project (Advanced Electron-Photon Facility), which will be operated under a joint collaboration between Crane Naval Surface Warfare...
LHC sets record as highest energy particle accelerator
On March 19, the LHC set yet another energy record as it ramped up to circulate two 3.5 TeV proton beams for the first time.
GE to expand access of MRI systems to underdeveloped regions
GE Global Research has been awarded a four-year, $3.27 million award from the National Institutes of Health (NIH) for new magnet technology that will cut back on the costs and inconveniences of current MRI systems.
BNL’s RHIC detects exotic antimatter
From http://www.bnl.gov: An international team of scientists studying high-energy collisions of gold ions at the Relativistic Heavy Ion Collider (RHIC), a 2.4-mile-circumference particle accelerator located at the U.S. Department of Energy’s (DOE) Brookhaven National Laboratory, has published evidence of the most massive antinucleus discovered to date.
Hypres Figure of Merit for Multi-Stage Cryocoolers
In the Winter 2010 issue of Cold Facts, an article was featured entitled "Hypres: Progress in SC RF for Telecommunications." The article mentions that Hypres has developed a figure of merit (FoM) that allows them to compare cryocoolers with different stages for their applications.
ADVERTISEMENT
Refrigerators and Liquefiers
Two of the most common terms used in cryogenics are “refrigerator” and “liquefier.” These terms describe similar and, as will be seen, in some cases identical components. A refrigerator provides cooling (that is, absorbs heat) at cryogenic temperatures. Refrigerators typically put a working fluid (such as helium) through one of...
Air Separation
Air separation is one of the largest, as well as earliest, industrial applications of cryogenics. In this process, cryogenic temperatures are used to separate air into its constituent gases: nitrogen (78.08%), oxygen (20.95%), argon (0.93%) and carbon dioxide (0.3%). Trace gases such as krypton, neon, xenon and helium total far...
Coefficient of Performance and Figure of Merit
The coefficient of performance (COP) is used to describe the effectiveness of refrigerators, including those operating at cryogenic temperatures. The COP is defined as the amount of heat removed at the cryogenic operating temperature of the refrigerator divided by the amount of work that must be applied to remove the...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Specs and info on turbo expanders
I am a fourth year chemical engineering student doing a design project for the liquefaction of natural gas to DME and we are using a turbo expansion unit. I was wondering whether you would send me some specs and any additional information on turbo expanders that I could use as...
Colleges that offer cryogenic studies
Would you happen to know of any colleges in the US that offer cryogenics as a major? If not, should I major in something like biology or physics before, then branch off to the field of cryogenics? Any information that you could give me would be greatly appreciated, considering this...
Sudden loss of vacuum in LHe storage dewar
I’m trying to find data on what happens when a 100 Liter LHe storage dewar experiences a catastrophic failure such as a sudden loss of vacuum. If anyone has any info on this subject, it would be very helpful.
Data on hardness of Indium?
Where can I find experimental data on the hardness of Indium, as a function of temperature, as well as any existing data on the thermal contact conductance of junctions containing Indium foil, also as a function of temperature?