GOW-MAC introduces Series AR710 and AR720 gas analyzers
GOW-MAC Instrument Company, introduces the process oriented Series AR710 and AR720 gas analyzers with High Frequency Argon Discharge Ionization Detector (HFADD).
ADVERTISEMENT
Ken Halpin joins FIBA
FIBA Technologies, Inc. recently announced the addition of Ken Halpin as Senior Director, Human Resources.
Ray Radebaugh receives the 2009 Collins Award
At the CEC/ICMC Awards Breakfast on July 2, Ray Radebaugh received the prestigious Samuel C. Collins Award for “an individual who has made outstanding contributions to the identification and solution of cryogenic engineering problems and has…demonstrated a concern for the cryogenic community through unselfish professional service and leadership to this...
CryoStim™ treatment to begin FDA clinical trials
Immunovative Therapies, Ltd. recently announced that its New Drug (IND) application was cleared by the US Food and Drug Administration, allowing the company to begin clinical trials of its experimental CryoStim™ cancer vaccine product for the treatment of advanced metastatic solid tumors.
2009 CEC/ICMC overview
The 2009 Cryogenic Engineering Conference/International Cryogenic Materials Conference brought together almost 500 persons from all areas of cryogenics to exchange technology and ideas.
Paratherm redefines technical support for heat transfer fluid systems
Paratherm Corporation has launched "Immersion Engineering," a comprehensive bundling of services which include: fluid analysis, fluid maintenance, training, troubleshooting and consulting.
ADVERTISEMENT
Joule-Thomson Effect
The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...
Current Leads
One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...
Multilayer Insulation
Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Information about a process called “cryogenically stretch-formed ss”
I am remembering in the 1970’s when astronauts were walking on the moon and carried oxygen in 300 ss bottles inside LN2 tanks which were filled and pressurized.
Small cryo-gun for our health service clinic
I am Assistant Director for Environmental Health & Safety at a university health service clinic.
Additional sealing materials besides PTFE or glass filled PTFE
I am an engineer looking to improve our solenoid valve sealing on cryogenic medias. I was wondering if you knew of materials other then PTFE or glass filled PTFE that could be used for sealing.
What is the temperature range of cryogenics?
Could you please tell me what is the temperature range of cryogenics? In other words, is -100°F considered cryogenic, or does it start lower? Could I expect to see some extended life in D2 stamping dies? What would the recipe be to achieve the desired results using cryogenics?