TWI appoints Bill Corbin as Interim CEO
Bill Corbin, a current Board Member in the Board of Directors at Taylor-Wharton International, LLC (TWI), has been appointed Chairman and Interim Chief Executive Officer.
ADVERTISEMENT
NASA awards LN2 and LOX contracts
Linde LLC, Air Products and Chemicals, Inc. and Air Liquide Industrial have all been awarded contracts to supply liquid nitrogen and liquid oxygen to six NASA facilities.
NIU’s proton center to miss deadline for completion
The $159 million cancer treatment center planned at Northern Illinois University will almost certainly miss the March 2010 completion date, a date that was required by the state when the project was approved.
Full Interviews from Industrial Gas Manufacturers
The Spring 2009 issue of Cold Facts featured interviews from leaders in the industrial gases industry. Here are the interviews in their entirety, including information about each company's background and additional comments provided during the interview.
Airgas Gaspro celebrates centenary
From gasworld, June 2009: Airgas Gaspro, a business unit of Airgas, Inc., is celebrating 100 years in the Hawaiian community.
Technex delivers cryogenic tank semi-trailer to Iceblick
Technex Limited, a manufacturer of cryogenic tank semi-trailers for transporting liquid gases and liquid natural gas (LNG), has successfully completed the delivery of a cryogenic tank semi-trailer to Iceblick, a manufacturer and supplier of rare and industrial gases.
ADVERTISEMENT
Space Cryogenics
Space cryogenics is, somewhat obviously, the application of cryogenics to space exploration and science. The use of cryogenics in space optimizes the launching of vehicles, provides power and life support to spacecraft and is critical for many scientific observations.Space cryogenics has a number of challenges and has driven both pure...
Exergy
The science of thermodynamics plays a major role in cryogenics. It underlies the various refrigeration cycles, from Carnot to Brayton (Cold Facts Vol. 32 No. 2) and Joule-Thomson, is a fundamental part of the definition of terms such as coefficient of performance (Cold Facts Vol. 31 No. 1) and even...
Cryogenic Treatment
Cryogenic treatment is the process of cooling materials to cryogenic temperatures temporarily to improve their material properties at room temperature. This is distinct from cooling materials down to cryogenic temperatures to take advantage of phenomena such as superconductivity that only occur at cryogenic temperatures. Cryogenic treatment, sometimes also referred to...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Any experience with G-10 in an extremely cold environment?
I have a cryostat with closed cycle cryocooler attached. The case is aluminum with a G-10 spacer between the case and a stainless steel bellows that supports the cryocooler.
Designing a liquid oxygen bath
I’m designing a Liquid Oxygen Bath to place composite coupons in the bath and soak 96 samples for intervals of 8 hours, 24 hours, 7 days, 21 days, 42 days, 62 days and 90 days.
School science projects involving cryogenics and metallurgy?
Can you recommend any school science projects that would involve cryogenics and metallurgy?
Metallic Salts Normally Used to Produce Ultra-Low Temperatures?
Regarding the method known as the Adiabatic Demagnetization of Paramagnetic Salts: What metallic salts are normally used to produce the ultra-low temperatures used for near-absolute-zero cryogenic research? Which salts are the most efficient? Which make the best cooling agents? And which are used most commonly by physicists? I am looking...