CSA Board Member George T. Mulholland dies
Longtime CSA Corporate Sustaining Member and Board Member and Secretary George T. Mulholland, 72, passed away Sunday, August 10, 2008 at Baylor Medical Center in Waxahachie, TX.
ADVERTISEMENT
AMSC and US Navy test HTS degaussing system
American Superconductor announced that it has supplied critical components for a high-temperature superconductor degaussing coil system that will soon undergo US Navy sea trials.
Thermal conductivity of zirconia and Y-stabilized zirconia
We have been searching for information about the low temperature (4K -> 77K) thermal conductivity of zirconia and Y-stabilized zirconia without much success. Is anyone aware of sources for this information?
Portable equipment for an iqf system?
We are interested in purchasing small portable equipment for an iqf system. We want to process between 500 to 1000 Kg/day of berries and strawberries. Can you please let us know about equipment that can meet our requirements? Please specify the installation area we will need plus additional facilities and...
Transporting tank for Liquid Helium with special option for filling cylinders with gaseous helium
We are looking for a transporting tank for Liquid Helium with the special option for filling cylinders with gaseous helium. This unit should transport LHe and have the ability to fill 40-liter cylinders with helium at pressures up to 150-200 bar.
Industrial cryogenic pump manufacturers?
I am working on a cryogenic plant project and looking for industrial cryogenic pump manufacturers. Any guidance would be greatly appreciated.
ADVERTISEMENT
Helium-3
Helium-3 (3He) is one of the two stable isotopes of helium. The other is the much more common Helium-4 (4He). Neither of these isotopes should be confused with He II, which is the second liquid phase of 4He. He II was discussed in this column in the Spring 2010 edition...
Cryopumping
Cryopumping refers to the use of cryogenic temperatures to produce vacuum in enclosed spaces. More broadly, it can also refer to the removal of gases via cryogenic temperatures from a flow stream or enclosure without necessarily resulting in vacuum pressures. This is an important application of cryogenics and is used...
Thermal Acoustic Oscillations
Thermal Acoustic Oscillations (TAO) are a common event in cryogenic systems that can have significant adverse effects on the performance of the system. TAOs are sustained pressure oscillations that can occur in tubes containing gas, closed at one end (the warm end) that have a very large temperature gradient along...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Looking for the thermal conductivity of the high density polyethylene (HDPE) between 1.9 and 10K
I am looking for the thermal conductivity of the high density polyethylene (HDPE) between 1.9 and 10K (or even up to higher temperatures). The best would be to have these data for the HDPE material which sold by the CERN shop, which has a density of 0.95 g/cm3. Pier Paolo...
What is "Alpha" cryogenic processing?
Can somebody please tell me what the “Alpha Cryogenic Process” is? How is it different from ordinary cryogenic processing? Bernd Ahne, HiFi-Tuning
Do Stirling coolers have any relation to Stirling engines?
I was just wondering, do Stirling coolers have any relation to Stirling engines?
What type of MLI should be used in LOX (VJ) lines and flex hoses?
I work for ASRC Aerospace at the Kennedy Space Center (KSC). We support NASA in ground support equipment (GSE) design. I have a question concerning the type of multilayer insulation (MLI) to use in LOX vacuum Jacketed (VJ) lines and flex hoses.