Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Cryostat for storing fish samples at -20 degrees C

We are a small Food Chemistry Laboratory functioning within the Seychelles Bureau of Standards. We wish to purchase a cryostat for the purpose of storing fish samples at *-20ºC* prior to the analysis of Histamine in the tissue of Tuna by HPLC.

Looking for information on the liquid nitrogen level controllers industry.

I am currently researching liquid nitrogen level controllers and was wondering if you had any information on the industry (numbers sold per annum, and any systems that don’t involve a solenoid.) Your help would be greatly appreciated.

Cryogenic data poster

I would like to get several copies of the wonderful “Cryogenic Data” poster that was produced by the Culham Laboratory in 1970. Does anyone know from whom they can be obtained?

Thermal conductivity of zirconia and Y-stabilized zirconia

We have been searching for information about the low temperature (4K -> 77K) thermal conductivity of zirconia and Y-stabilized zirconia without much success. Is anyone aware of sources for this information?

Portable equipment for an iqf system?

We are interested in purchasing small portable equipment for an iqf system. We want to process between 500 to 1000 Kg/day of berries and strawberries. Can you please let us know about equipment that can meet our requirements? Please specify the installation area we will need plus additional facilities and...

Transporting tank for Liquid Helium with special option for filling cylinders with gaseous helium

We are looking for a transporting tank for Liquid Helium with the special option for filling cylinders with gaseous helium. This unit should transport LHe and have the ability to fill 40-liter cylinders with helium at pressures up to 150-200 bar.

Latest in Defining Cryogenics

Cold Compressors

A common way to provide cooling below the normal boiling point of helium (4.2K) is to reduce the pressure above the bath of liquid helium, thus also reducing the bath’s equilibrium saturation temperature. For example, to produce a 1.8K bath of liquid helium, the saturation pressure has to be reduced...

Kapitza Conductance

Kapitza conductance refers to the heat transfer between a solid surface and a fluid that covers that surface. Fundamentally, it describes the inherent difficulty in transferring energy from a solid to the fluid covering the solid surface. This phenomenon was first observed by P. L. Kapitza in 1941 while studying...

Thermosyphons

A thermosyphon (or thermosiphon) is a device that transfers heat via natural convection in a fluid. The natural convection is driven by gravity with the colder, denser fluid flowing downhill and the warmer, less dense fluid flowing back up. Thus, thermosyphons connect an object to be cooled with a reservoir...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Resistance to embrittlement at low temperatures

Could anyone advise me about resistance to embrittlement at low temperatures for the alloys in subject, i.e. does the CF10M perform like the CF8M in the same cryogenic service (-215F)? Amara Maafi Amara.Maafi@bg-group.com

Need help with temperature dependent model

I am a fourth-year student at New Zealand University. My name is Xu Ke. I have a project to generate a temperature dependent model for inductor, capacitor and diode by using PLECS. PLECS is software which acts as a toolbox for MATLAB. In my models, the temperature is very low,...

In what form is water available in LN2?

Does anybody know in what form water is available in LN2? There probably is a block of ice in the bottom of the tank. But as water comes in many shapes, I can imagine snow or crystals floating free in the LN2. When water is available in LN2, could small...

Separating gases using cryogenics

We are looking for some consulting engineers who understand how to separate gases using cryogenics. We have a new process which takes biomass and converts it to 5 gases and we need to separate these gases into their pure forms. Thanks for your help. Malcolm Draper Energy Research Group LLC...

CATEGORIES