CERN marks latest milestone with ceremony
A brief ceremony in Geneva on November 7, 2007 marked the latest milestone for CERN's Large Hadron Collider (LHC), the world's most powerful particle accelerator.
ADVERTISEMENT
Two scientists join Argonne’s Center for Nanoscale Materials
Two scientists, Elena Rozhkova and Elena Shevchenko, have joined Argonne National Laboratory's Center for Nanoscale Materials.
AmSC and TECO-Westinghouse announce research joint venture
American Superconductor Corporation and TECO-Westinghouse Motor Company announced the formation of a research joint venture to develop high temperature superconductor (HTS) and related technologies for high-power, direct drive wind generators for offshore wind farms.
DNV approves FIBA for Manufacturer Certificate No. T-1142
Det Norske Veritas (DNV) has granted FIBA Technologies, Inc. approval of Manufacturer Certificate No. T-1142, which approves FIBA for the manufacturing of seamless gas bottles and pressure vessels of Class I and II. FIBA is one of only four companies in the world to be granted this approval.
Carl T. Johnson nominated for Administrator of PHMSA
Carl T. Johnson, former president of The Compressed Gas Association, has been nominated by President George W. Bush to be Administrator of the Pipeline and Hazardous Materials Safety Administration at the Department of Transportation.
James Fesmire gets promoted at NASA Kennedy
CSA Technical Director James Fesmire was recently promoted to the position of Senior Principal Investigator at the NASA Kennedy Cryogenics Test Laboratory.
ADVERTISEMENT
Dilution Refrigerators
Dilution refrigerators are a common technique for reaching temperatures below 1K, particularly where continuous cooling at these temperatures is required. Helium exists in two stable isotopes: 4He and 3He. Naturally occurring 3He is extremely rare, constituting less than 1 part per million of helium gas. However, 3He can be manufactured,...
Oxygen Deficiency Hazards
Oxygen Deficiency Hazards (ODH) are a significant safety issue in cryogenic facilities. ODH occurs when inert gases such as nitrogen, helium or argon displace room air and thus lower the percentage of oxygen in the space below that required for human life. OSHA defines an area as oxygen deficient if...
Kelvin Temperature Scale
The Kelvin temperature scale is the principal temperature scale used in cryogenics and science. The kelvin is also one of the seven base units in the Système International d’Unités (SI) and is the unit of thermodynamic temperature. Thermodynamic temperature is a fundamental physical quantity (like mass, length or electrical current)...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Reliability and mounting of electronic substrates at low temperatures
I am currently working on the design of a focal plane assembly to be implemented on a small satellite (4 EMCCD detectors) to be operated at -80°C (which is not really cryogenic and likely still considered boiling hot for most of you :-). As it is passively cooled, the assembly...
Are 3D drawings included in the sale of a cryogenic plant?
I have a question concerning the 3D drawings of a cryogenic plant. The integration of the 3D drawings of a plant with the 3D main model of a new laboratory or a new facility can be a complex work that takes a lot of time. I would like to know...
Looking for a source of LOX impact testing to ASTM D2512
I have been looking for a source of LOX impact testing to ASTM D2512. I am aware of NASA and White Sands, but am looking for a commercial entity doing the work. No luck so far, even calling a lot of the folks on the CSA website. Any referrals will...