Dr. Bird named Director of FSU’s Magnet Science and Tech. Group
CSA member Dr. Mark Bird has been officially named Director of Florida State University's Magnet Science and Technology Group.
ADVERTISEMENT
Eden Cryogenics and Niowave announce a teaming agreement
Eden Cryogenics, LLC and Niowave, Inc. have announced a teaming agreement to better serve customers and product needs for the Superconducting Particle Accelerator and National Laboratory markets.
Larbalestier to receive award from ICMC
David Larbalestier, the director of FSU's Applied Superconductivity Center (www.magnet.fsu.edu/magnettechnology/research/asc/overview.html), has been selected to receive the Cryogenic Materials Award for Lifetime Achievements 2007 from the International Cryogenic Materials Conference (ICMC). He will be presented with the award during a meeting of the conference on Tuesday, July 17, in Chattanooga, Tenn.
Powerful magnet achieves nominal operating conditions
The ATLAS Barrel Toroid, the largest magnet every built, has successfully been powered up to its nominal operating conditions at the first attempt.
Los Alamos lab announces magnet is ready for use at 85 Tesla
Los Alamos National Laboratory announced that after 10 years of work, the world's most powerful pulsed, non-destructive magnet is ready for use at 85 Tesla, Associated Press reported.
Eden Energy announces global re-alignment of its organization
Eden Energy, Ltd. has announced a global re-alignment of its worldwide organization, including corporate name changes, facility moves and the advancement of key personnel, in order to focus on key customer segments and capture future global growth opportunities.
ADVERTISEMENT
Mixed Refrigerant Cycles
Most cryogenic refrigeration systems, both large scale systems and cryocoolers, use helium as a working fluid. There are a number of advantages to helium, not the least of which is that helium remains a fluid down to the lowest achievable temperatures. In order to freeze helium, pressures of over 20...
Fountain Pumps and He II Phase Separators
Helium II (He II), the second liquid phase of the 4He isotope described in this column in Cold Facts Spring 2010 (http://2csa.us/he2), can be modeled as consisting of two interpenetrating fluids. One, the superfluid component, has zero viscosity and entropy and the other, the normal fluid component, has nonzero viscosity...
Turboexpanders
A vital technology in the refrigerators and liquefiers described in Cold Facts Volume 31 Number 3 is that of turboexpanders. These devices are rotating machines in which the process fluid (e.g., helium) does work against the turboexpander while moving from high pressure to a lower pressure and thus is cooled....
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Any experience with Tungsten or Tantalum metal springs in a low temp environment?
I would like to use metal springs made of Tungsten or Tantalum in low temperature environment. Does anybody have any experience with such springs? More precisely, I would like to make compression springs by rolling tungsten or tantalum wire on a rod. I expect that, typically, the spring constant will...
Standards & specifications for pipe & tube couplings
I am interested in finding out more about cryogenic applications and what standards, specifications and test methods (ASTM, etc.) are required for qualification of pipe and tube couplings.
Looking for a test house to test the static coefficient of friction under cryogenic conditions
I am looking to find a test house that is capable of testing the static coefficient of friction under cryogenic conditions. We can be flexible on most of the test parameters, including the test coupon configuration, but we’re looking for a test house that can provide the following test environment:...
Approximating pressure changes over time in cryogenic cylinders
I am an Air Resources Engineer with the California Air Resources Board (CARB). My senior management has asked me to investigate approximating pressure changes over time in cryogenic cylinders that contain LNG. So far, I have taken a stab at the problem, seeking to take a back-of-the-envelope approach (as directed...