Air Liquide DTA names Adamo Screnci Commercial Director
CSA Corporate Sustaining Member Air Liquide DTA has named Adamo Screnci Commercial Director.
ADVERTISEMENT
Linde introduces mobile hydrogen refueling unit
Linde created a mobile hydrogen refueling unit with which it is possible to refuel both with liquid hydrogen and gaseous hydrogen completely autonomous.
John Miller accepts new position at ORNL
John Miller, former director of Magnet Science and Technology (MS&T) at the National High Magnetic Field Laboratory (NHMFL), has accepted the position of magnet system team leader at the Oak Ridge National Laboratory, starting at the end of June. Both labs are CSA Corporate Sustaining Members. Mark Bird has now...
Students found dead inside deflated helium balloon
Two college students were found dead on June 4 inside a large, deflated helium balloon. Officials said the students had apparently pulled the balloon down and crawled inside it. Inhaling helium can lead to brain damage and death from lack of oxygen, according to the Compressed Gas Association.
Justin Schwartz named Editor-in-Chief
Justin Schwartz, a professor of engineering at Florida State University, has recently been named Editor-in-Chief of IEEE Transactions on Applied Superconductivity publications. Schwartz is a recipient of the CSA Roger W. Boom Award.
Cryogenics Division of SHI acquires APD Cryogenics
In February 2002, the Cryogenics Division of Sumitomo Heavy Industries (SHI), one of the most respected cryogenic companies in the world, acquired APD Cryogenics.
ADVERTISEMENT
Cold Compressors
A common way to provide cooling below the normal boiling point of helium (4.2K) is to reduce the pressure above the bath of liquid helium, thus also reducing the bath’s equilibrium saturation temperature. For example, to produce a 1.8K bath of liquid helium, the saturation pressure has to be reduced...
Kapitza Conductance
Kapitza conductance refers to the heat transfer between a solid surface and a fluid that covers that surface. Fundamentally, it describes the inherent difficulty in transferring energy from a solid to the fluid covering the solid surface. This phenomenon was first observed by P. L. Kapitza in 1941 while studying...
Thermosyphons
A thermosyphon (or thermosiphon) is a device that transfers heat via natural convection in a fluid. The natural convection is driven by gravity with the colder, denser fluid flowing downhill and the warmer, less dense fluid flowing back up. Thus, thermosyphons connect an object to be cooled with a reservoir...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Resistance to embrittlement at low temperatures
Could anyone advise me about resistance to embrittlement at low temperatures for the alloys in subject, i.e. does the CF10M perform like the CF8M in the same cryogenic service (-215F)? Amara Maafi Amara.Maafi@bg-group.com
Need help with temperature dependent model
I am a fourth-year student at New Zealand University. My name is Xu Ke. I have a project to generate a temperature dependent model for inductor, capacitor and diode by using PLECS. PLECS is software which acts as a toolbox for MATLAB. In my models, the temperature is very low,...
In what form is water available in LN2?
Does anybody know in what form water is available in LN2? There probably is a block of ice in the bottom of the tank. But as water comes in many shapes, I can imagine snow or crystals floating free in the LN2. When water is available in LN2, could small...
Separating gases using cryogenics
We are looking for some consulting engineers who understand how to separate gases using cryogenics. We have a new process which takes biomass and converts it to 5 gases and we need to separate these gases into their pure forms. Thanks for your help. Malcolm Draper Energy Research Group LLC...