ADVERTISEMENT
Researchers Investigate Reliability of Cryogenic Vacuum Distillation for Soil Water Extraction
The stable isotopes hydrogen and oxygen (δ2H and δ18O, respectively) in soil water are widely used in ecological studies, which rely on the accurate extraction of unfractionated water from different soil types. Cryogenic vacuum distillation (CVD) is the laboratory-based technique most widely used in eco-hydrological studies. However, the reliability of...
Cryogenic Bearings Smooth Way To ‘Greener’ Marine Power
The pressure to reduce greenhouse gas emissions continues as does the search for ‘greener energy solutions’ and one of the consequences of this is significant growth in the use of Liquid Natural Gas for marine applications. LNG has long been regarded as a sustainable fuel and has gained significant traction...
New Approach for the Identification of Metabolites Using LC with Ion Mobility and Cryogenic Spectroscopy
Researchers from Polytechnique Fédérale de Lausanne in Switzerland have developed a new approach for identifying isomeric and isobaric metabolites using high-resolution ion mobility spectrometry (IMS) and cryogenic infrared (IR) spectroscopy. The complex structure of metabolites has made their identification challenging, and analytical standards are often required to confirm their presence...
Chart Industries, Inc. and Crane Company Successfully Test a New Liquid Hydrogen Valve
Chart Industries, Inc. and Crane Company have successfully tested a new cryogenic valve designed and built by Crane for liquid hydrogen applications. This is the first valve launched from Crane’s CRYOFLO™ line of bellow seal vacuum jacketed globe valves, designed and tested by Crane, with final validation, review, and testing conducted...
Consortium Develops Cryogenic 4 K and 77 K Transistor Models
The Innovate UK-funded CryoCMOS Consortium, led by SureCore Ltd, reports that it has successfully created new, PDK-quality, transistor models characterized for both 4 K and 77 K cryogenic operation. SureCore is using these to develop key foundation IP to enable the design of cryo-control ASICs for use in the quantum...
ADVERTISEMENT
Regenerators
Regenerators or regenerative heat exchangers are a key component of cryocoolers such as pulse tube cryocoolers (Cold Facts, August 2014). Regenerator performance greatly affects the coefficient of performance of cryocoolers. Improvements in regenerator design and, in particular, regenerator materials have been an important factor in the improvement of the performance...
Pulse Tube Cryocoolers
The development of pulse tube cryocoolers has been a significant topic of research and development over the past 20 or so years. Pulse tube cryocoolers have a number of advantages over other types of cryocoolers and are now available commercially. In order to understand pulse tube cryocoolers, it’s best to...
Thermal Expansion
Thermal expansion refers to the change in size (length or volume) that a material undergoes as its temperature changes. In cryogenic systems this effect can be quite large and must be allowed for in the design. In isotropic materials, which include most engineering materials, the thermal expansion is the same...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Seeking alloy that keeps elastic property down to 10K
I am looking for a metal (alloy) that supports high temperatures (at least 1600K) and keeps its elastic property at low temperatures down to 10K. Rhenium is a good one because it does not become brittle. But it is quite expensive. Pure tungsten and molybdenum enter in the brittle regime...
Searching for a freezer that does not need electricity
I’m student of University of Barcelona. We do technical cryogenic research and we are searching for a cryogenic portable freezer that does not need electricity. We can’t find any company that offers something like this. The product we are looking for is the typical portable freezer for food or drinks...
FEP Encapsulated O rings in the cryogenic process
Can you please advise if FEP Encapsulated O rings are used within the cryogenic process and what materials? I have been asked by my company to write about FEP Encapsulated O rings for a training seminar.
Need material property data for polycrystalline / sintered ceramics
I am a ME grad student currently working on the design of a detector array / focal plate of a scientific space instrument operating at a temperature of about -80…-100°C. Although this is not in the cryogenic temperature range, I would like to address two questions to you as the...