ADVERTISEMENT

KEYCOM Celebrates 30 Years of Worldwide Industry Standards

The computing elements of a quantum computer can only be operated properly when they are free of electronic noise. In order to achieve this state, it is necessary to realize an ultralow temperature environment in the millikelvins at a minimum. However, it is not enough to simply provide a dilution...

Blood Banks: Cryogenic Blast Freezing to -90°C in Minutes Increases Throughput

Blood banks utilize freezers to rapidly freeze and store a range of thermally sensitive products such as blood plasma and cryoprecipitate. However, conventional compressor-based freezers can take hours to reach the ultra-low target temperature, slowing processing to a level that may not be sufficient for many operations. The challenge is...

Novel Superconducting Magnet Thrusters to be Tested Out on Space Station

A New Zealand research institute and U.S. commercial firm Nanoracks are combining to send a superconducting magnet technology demonstrator to the International Space Station to test a novel type of space propulsion. The Paihau—Robinson Research Institute intends to test a type of electric space thruster known as applied-field magneto plasma dynamic...

Cryogenics Specialist Orders First Satellite for Detecting Methane Leaks

Absolut Group, a French cryogenic technology provider, said Dec. 7 it has ordered a demo nanosatellite for a constellation that would use sensors at very low temperatures to detect greenhouse gas leaks. The company’s newly created Absolut Sensing subsidiary ordered the chassis for a 16U satellite it calls Gen1 from Lithuania’s...

Got Propane?

As the maritime industry mulls the ‘fuel of the future,’ a strong and growing case can be made for propane based on availability, cost and ease of use compared to competitive fuels. Darren Monzingo, president of FARO Industrial and VP of Engineering for GEM Marine, is a marine engineer and naval...

Trenta’s Final Fusion Test Campaign

In 2023, Helion Energy, Inc., an American fusion research company, will end operations on Trenta, its 6th fusion prototype. The team is now undergoing Trenta’s last-ever fusion test campaign. For two years, its scientists and engineers have carried out rigorous research to test the capabilities of this fusion machine. The Helion...

ADVERTISEMENT

Cold Compressors

A common way to provide cooling below the normal boiling point of helium (4.2K) is to reduce the pressure above the bath of liquid helium, thus also reducing the bath’s equilibrium saturation temperature. For example, to produce a 1.8K bath of liquid helium, the saturation pressure has to be reduced...

Kapitza Conductance

Kapitza conductance refers to the heat transfer between a solid surface and a fluid that covers that surface. Fundamentally, it describes the inherent difficulty in transferring energy from a solid to the fluid covering the solid surface. This phenomenon was first observed by P. L. Kapitza in 1941 while studying...

Thermosyphons

A thermosyphon (or thermosiphon) is a device that transfers heat via natural convection in a fluid. The natural convection is driven by gravity with the colder, denser fluid flowing downhill and the warmer, less dense fluid flowing back up. Thus, thermosyphons connect an object to be cooled with a reservoir...

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Need help comparing chest freezers and upright freezers

Currently we use in our Biobank an upright -80 freezer to store all our samples. We are planning to buy a fully automated bio-repository storage that will do the picking of samples under restricted conditions. But in the meantime I foresee that we have to pick the samples manually. The...

Need recommendations for cryogenic vials

I am looking into standardizing our range of bio storage tubes (cryogenic vials). These will be for both blood and tissue samples and their derivatives. Any recommendations, comments on Micronics, Nalgene, Nunc and or others that are suitable for long term -80 C and -196 C storage, DNA/RNA suitable, would...

We need a custom machine for flash freezing of water

We are an ice making company and have started a new project, which is related to flash freezing of water. It is based on cryogenics technology and we need a custom made machine. I would kindly ask you to pass me a few companies who would be interested in such...

Looking for a pump suitable for cold liquids

I would like to construct a small cooling circuit (appr. 50 x 50 cm) pumping liquid at a temperature down to -120°C from a cold reservoir to the specimen to be cooled. The tubes and connections are not a problem, but does somebody know a pump (suction/compression for circulation) suitable...