Cold Facts Digital – Page 61 – The go-to place for Cryogenics and Superconductivity

Cracking the Code to Human Organ Banking

by Dr. Lakshya Gangwar, University of Minnesota Imagine a future where organs can be stored indefinitely “as glass,” and ready to be brought back to life at a moment’s notice. That’s the bold horizon sketched by a new study from University of Minnesota researchers, published in Nature Communications, 16 8511...

Stirling’s Liquid Nitrogen Solution for Smallholder Farmers Displays the Power of Cold

by Pranav Date, Stirling Cryogenics The Cold Chain Problem in Africa Africa’s agricultural productivity has been steadily improving, yet the absence of cold storage facilities in rural regions continues to pose severe challenges. Without reliable refrigeration, perishable goods often spoil before they can reach markets. This results in high post-harvest...

Nitrofreeze Cryogenic Solutions Dry Ice Blasts for Historic Restorations

By Ryan Taylor, Nitrofreeze Cryogenic Solutions Dry ice blasting is used in a wide range of historic restoration projects, including a recent one completed in Rockport, Mass., in July of this year. Nitrofreeze Cryogenic Solutions was contracted to dry ice blast barn board wood inside a fishing hut to lighten...

Zero-Loss Liquid Hydrogen Storage and Transfer Technology Transforms the Hydrogen Economy

By Greg Gosnell, CEO of GenH2 Corp. Hydrogen is essential to reducing carbon emissions and transitioning away from fossil fuels. Yet storage and transfer losses of up to 40% have limited its cost-effectiveness and slowed adoption. The key to unlocking hydrogen’s potential lies in Zero-Loss Controlled Storage Technology. By minimizing...

Excel Loading Systems Innovates Cryogenic Fluid Transfer

by Excel Loading Systems Communications Since its establishment in 2013, Excel Loading Systems has rapidly emerged as a leading manufacturer of advanced loading arm systems, particularly excelling in cryogenic applications. Specializing in the safe and efficient transfer of liquefied gases such as LNG, liquid nitrogen, liquid oxygen and hydrogen, Excel...

Beyond Gravity Powers Europe’s New Weather Satellites with Advanced Technology

by Christian Thalmayr, Senior Manager Global Communication, Beyond Gravity In mid-August, the first in a new generation of European polar-orbiting weather satellites will launch aboard an Ariane 6 rocket from the European Spaceport in Kourou, South America. The MetOp-Second Generation (MetOp-SG) satellite will gather vital data on humidity, temperature and...

Latest in Defining Cryogenics

Dewar

A dewar is a type of cryostat named after Sir James Dewar, the researcher who first developed the concept of a vacuum insulated container with silvered walls to reflect thermal radiation. Dewar was the first to liquefy hydrogen, and he created the device to store his discovery. The thermos bottle...

Stirling and Gifford-McMahon Cryocoolers

Stirling and Gifford-McMahon (GM) cryocoolers are two of the most commonly used cryocoolers in cryogenics. Both devices have a significant industrial base and operate at a wide range of temperatures and capacities. The thermodynamic cycles for both of these cryocoolers are quite similar. The Stirling cycle consists of a compressor,...

Liquefied Natural Gas (LNG)

A significant commercial application of cryogenics is the liquefaction, transport and storage of natural gas. Liquefied Natural Gas (LNG) is generally 95 percent methane with a few percent ethane and much lower concentrations of propane and butane. LNG liquefies at 111.6 K. Unlike many applications of cryogenics, the motivation for...

Latest in Cryo Central

Primary Standards

Elie K. Track Hypres, Inc. elie@hypres.com http://www.hypres.com/ Primary standards involve the exact definition and realization of units of measurement for various quantities, time, length, mass, voltage, resistance, current, etc. International agreements based on the latest scientific knowledge define those units, and their realizations vary depending on the unit itself. For...

Shrink Fitting

Robin A. Rhodes Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Shrink fitting, (or “compression fitting” as it is sometimes called), is a method used to insert a pin or bushing into a housing or other assembly requiring an extremely tight tolerance fit. It can be used as an alternative to...

Telecommunications

From the Winter 2004 issue of Cold Facts magazine The recent M-Calc IV — 4th Industry Assessment workshop discussing military and commercial applications for low-cost cryocoolers, held in November in San Diego, highlighted progress being made in cryogenics as applied in telecommunications. The reliability and long lifetime of projects now...

Wind Tunnels

Dr. Robert Kilgore The development of the cryogenic wind tunnel is one of many significant breakthroughs in both cryogenics and wind-tunnel technology made during the past millennium. Interest in the development of high-speed commercial and military aircraft resulted in a review of problems of flow simulation in transonic wind tunnels...

Latest in Ask the Experts

Dry ice vs. LN2 for preserving tissue

I was wondering if anyone could provide feedback/data on whether it is best in terms of preserving tissue quality to freeze tissue in OCT using dry ice versus liquid nitrogen?

Are there lists of existing biorepositories?

We are a relatively new Biorepository that was developed as part of a large breast cancer epidemiology study, and thus far we have accumulated DNA on over 8000 women along with extensive questionnaire, mammography, and case status data. I was wondering, are there lists of existing Biorepositories with their contents?...

Heat flux value for inner vessel when vacuum insulation fails

To size a relief valve for a LN2 cryostat I have to know “worse case” boil-off rate when vacuum insulation failed and inner vessel with LN2 is in direct contact with room temperature air at 300K. So, I am looking for a heat flux value (watt/m2) to LN2 inner vessel...

Trying to design a system to store ammonia at -33°C

I am working on a project where we are trying to design a system to store ammonia at -33°C. In order to size the compressors to maintain the ammonia in the liquid state, I need to estimate the heat gained from the environment including the radiation from the sun and...

CATEGORIES