ADVERTISEMENT

Transformative ‘Green’ Accelerator Achieves World’s First 8-pass Full Energy Recovery

Scientists from Cornell University and the US Department of Energy’s (DOE) Brookhaven National Laboratory (BNL) have successfully demonstrated the world’s first capture and reuse of energy in a multi turn particle accelerator, where electrons are accelerated and decelerated in multiple stages and transported at different energies through a single beamline....

The Future of Particle Accelerators May Be Autonomous

Operators at the Linac Coherent Light Source (LCLS) particle accelerator, part of SLAC National Laboratory at Stanford University in California, looked into how they were spending their time managing the machine. They tracked the hours they spent on tasks like investigating problems and orchestrating new configurations of the particle beam...

60 Years of DESY: From Hamburg Particle Accelerator to Global Research Center

For the past 60 years, fundamental research has been carried out at the Deutsches Elektronen-Synchrotron (DESY) in Hamburg-Bahrenfeld. In those 60 years, DESY has become a world leader in accelerator technology, structure research, particle physics and astroparticle physics. DESY has developed pioneering technologies, which have been used by scientists from...

Jefferson Lab to be Major Partner in Brookhaven Electron Ion Collider Project

The Department of Energy (DOE) announced that it has taken the next step toward the construction of an Electron Ion Collider (EIC) in the United States. DOE announced that the collider will be sited at DOE’s Brookhaven National Laboratory in Upton NY. In addition, DOE’s Thomas Jefferson National Accelerator Facility...

The Pocket-Sized Particle Accelerator

The accelerator-on-a-chip is just a prototype, but its design and fabrication techniques can be scaled up to deliver particle beams accelerated enough to perform cutting-edge experiments that don’t require the power of a massive accelerator. By placing these chips in a series, researchers from SLAC National Laboratory and Stanford University...

ADVERTISEMENT

Regenerators

Regenerators or regenerative heat exchangers are a key component of cryocoolers such as pulse tube cryocoolers (Cold Facts, August 2014). Regenerator performance greatly affects the coefficient of performance of cryocoolers. Improvements in regenerator design and, in particular, regenerator materials have been an important factor in the improvement of the performance...

Pulse Tube Cryocoolers

The development of pulse tube cryocoolers has been a significant topic of research and development over the past 20 or so years. Pulse tube cryocoolers have a number of advantages over other types of cryocoolers and are now available commercially. In order to understand pulse tube cryocoolers, it’s best to...

Thermal Expansion

Thermal expansion refers to the change in size (length or volume) that a material undergoes as its temperature changes. In cryogenic systems this effect can be quite large and must be allowed for in the design. In isotropic materials, which include most engineering materials, the thermal expansion is the same...

Cryogenic Electronics

Randall Kirschman, consulting physicist, Mountain View, California ExtElect@gmail.com Cryogenic electronics—the operation of electronic devices, circuits, and systems at cryogenic temperatures—has been a valuable technology for decades. Cryogenic electronics (also referred to as low-temperature electronics, or cold electronics) can be based on semiconductive devices, on superconductive devices, or on a combination...

Particle Physics: High Energy Physics

Cryogenics and High-Energy Physics 1. From symmetry magazine: http://www.symmetrymagazine.org/cms/?pid=1000627: Cryogenics is the study of how materials behave at temperatures near absolute zero. In high-energy particle accelerators, such frigid temperatures reduce the electrical resistance of wires in superconducting magnets, increasing the magnet strength and allowing faster particle acceleration. The same holds...

HTS Degaussing Systems

From the Spring 2009 issue of Cold Facts (Volume 25, Number 2): Thanks to a joint project by the US Navy and a number of industry partners, high temperature superconducting (HTS) technology is now at the heart of an advanced degaussing system aboard the USS Higgins at the naval station...

Magnetic Resonance Imaging

From http://www.superconductors.org: An area where superconductors can perform a life-saving function is in the field of biomagnetism. Doctors need a non-invasive means of determining what’s going on inside the human body. By impinging a strong superconductor-derived magnetic field into the body, hydrogen atoms that exist in the body’s water and...

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...