Cold Facts Digital – Page 63 – The go-to place for Cryogenics and Superconductivity

Fermilab Achieves World-Record Field Strength for Accelerator Magnet

Scientists at the Department of Energy’s Fermilab (CSA CSM) have achieved the highest magnetic field strength ever recorded for an accelerator steering magnet, setting a world record of 14.1 teslas, with the magnet cooled to 4.5 kelvin or minus 450 degrees Fahrenheit. Lawrence Berkeley National Laboratory held the previous record...

First Hydrogen-Powered Bus Deployed in France

A hydrogen-powered passenger bus has been deployed in France for the first time, a step toward the country’s goal of a 100% clean-fueled bus fleet. With a range of 300km, the bus will run between the towns of Versailles and Jouy-en-Josas in the Yvelines region, and refuel its hydrogen tank...

Quest Thermal Group MLI Enters Space

Quest Thermal Group’s integrated multilayer insulation (IMLI) is currently being used in space on the ISS with NASA's RRM3 flight experiment and on the NASA/Ball Aerospace GPIM spacecraft. The group is also currently designing IMLI for use on the Lucy spacecraft—scheduled to go to Jupiter's asteroids—and is expected to have...

Neutrino Energy to Power IoT Devices

In 2015, it was discovered that neutrinos have mass, so in theory, they can impact matter and give up some of their kinetic energy. Neutrino Energy Group is developing neutrino-based power generators by designing materials that can convert the kinetic energy of a neutrino into electricity. Such devices could be...

A Universal Symbol for Cryogenic Hazards

CSA was recently asked about a universal symbol to denote cryogenic hazards. Our contacts at NIST have helped answer those inquiries. While OSHA (Occupational Safety and Health Administration) does not provide a symbol, a cryogen “shipped” container would be labeled with the Gas Cylinder pictogram and a description of the...

Innovative Accelerator Achieves Full Energy Recovery

An innovative particle accelerator designed and built by scientists from the US Department of Energy’s Brookhaven National Laboratory and Cornell University has achieved a significant milestone that could greatly enhance the efficiency of future particle accelerators. After sending a particle beam for one pass through the accelerator, machine components recovered...

Latest in Defining Cryogenics

Dewar

A dewar is a type of cryostat named after Sir James Dewar, the researcher who first developed the concept of a vacuum insulated container with silvered walls to reflect thermal radiation. Dewar was the first to liquefy hydrogen, and he created the device to store his discovery. The thermos bottle...

Stirling and Gifford-McMahon Cryocoolers

Stirling and Gifford-McMahon (GM) cryocoolers are two of the most commonly used cryocoolers in cryogenics. Both devices have a significant industrial base and operate at a wide range of temperatures and capacities. The thermodynamic cycles for both of these cryocoolers are quite similar. The Stirling cycle consists of a compressor,...

Liquefied Natural Gas (LNG)

A significant commercial application of cryogenics is the liquefaction, transport and storage of natural gas. Liquefied Natural Gas (LNG) is generally 95 percent methane with a few percent ethane and much lower concentrations of propane and butane. LNG liquefies at 111.6 K. Unlike many applications of cryogenics, the motivation for...

Latest in Cryo Central

Magnets

From “Superconductivity: Present and Future Applications” by the Coalition for the Commercial Application of Superconductors. Particle physics uses accelerators to recreate the conditions of the early universe in an attempt to piece together the complex puzzle of how we got to where we are today. These huge machines are used...

Energy Storage

From “Superconductivity: Present and Future Applications” by the Coalition for the Commercial Application of Superconductors. With power lines increasingly congested and prone to instability, strategic injection of brief bursts of real power can play a crucial role in maintaining grid reliability. Small-scale Superconducting Magnetic Energy Storage (SMES) systems, based on...

Astronomy

ASTRONOMY IN SPACE by Peter V. Mason, retired, Jet Propulsion Laboratory, and Visiting Associate, California Institute of Technology. Pmason@alumni.caltech.edu In thinking about the reasons to perform astronomy in space, we first consider the effect of the earth’s atmosphere. On a scale of decreasing energy, gamma rays, cosmic rays, X-rays and...

Cryocoolers

What is a Cryocooler? A mechanism that can extract heat from an object (cooler) and by doing so draw its temperature down below approximately 150 Kelvin (cryo). — (Courtesy Dr. Willy Gully) What is the difference between a Cryocooler and a Cryostat? A cryostat is any device designed to maintain...

Latest in Ask the Experts

Company to assist with developing a LN2 cooling system for EDX detector use?

Can you recommend a company to assist us in developing a LN2 cooling system for EDX detector use?

Data on thermal expansion down to 40K

For our cold mechanics, we use ball bearings from ADR from stainless steel which is AISI 440C, DIN X105CrMo17, W.Nr. 1.4125. Does anyone know the data of thermal expansion of this material down to 40 K?

Difference between radar and servo gauge for LNG tanks?

What is the difference between radar and servo gauge for LNG tanks? How do I understand the gauging system for LNG tanks and choose the best one?

Materials for "cryogenics in spacetech"?

I had to take a seminar in a national competition that is to be held in our country on the topic “cryogenics in spacetech.” For this, I need some materials related to it, and I thought to approach you for help. Can you suggest some relevant materials?

CATEGORIES