ADVERTISEMENT

Young Faces: The Next Generation in Cryogenics, Part II

In our last issue, we debuted our third installment of Young Faces, featuring young professionals who are doing interesting things in cryogenics and superconductivity and who show promise of making a difference in their fields. Here is Part II of that story, with responses listed in order of receipt.

Superfluid Helium in Space

Many scientific observations must be done in space at cryogenic temperatures a few millidegrees to a few degrees above absolute zero (-273°C). These include observations of the behavior of superfluid helium in space and observations with instruments and millimeter-wave telescopes operating at liquid helium temperatures.

CSA board certifies newly elected directors

At the August 14 CSA Board meeting held during the Applied Superconductivity Conference in Charlotte NC, the four directors recently elected by the society’s membership were certified.

Danko van der Laan receives 2014 Boom Award

The Roger W. Boom Award is given bi-annually to a young professional under 40 years of age who shows promise for making significant contributions to the fields of cryogenic engineering and applied superconductivity. This year, the award was presented to Dr. Danko van der Laan during an awards ceremony on...

Tips for Success When Using an ADR Cryostat

Following up on his discussion in the Fall 2013 issue of Cold Facts on when an Adiabatic Demagnetization Refrigerator (ADR) cryostat is the right tool for the job, Charlie Danaher provides useful technical tips on how to effectively use an ADR.

ADVERTISEMENT

Liquid Hydrogen

Hydrogen becomes a liquid at 20K and 1 bar. Liquid hydrogen (LH2) is an important substance in industry, transportation and research. Industrial uses of hydrogen include applications in the electronics, glass, chemical and metal processing fields. In these applications, the hydrogen is generally used as a room temperature gas but...

Superconducting Radiofrequency Cavities

Superconducting radio frequency (SRF) cavities represent an important application of cryogenics and superconductivity. SRF cavities are a technology for accelerating charged particle beams via the transfer of radiofrequency (RF) energy to the beams via resonant structures. As such, they are frequently found in large particle accelerators used for scientific research....

Thermal Radiation Shields

Actively cooled thermal radiation shields are a common feature of cryostats whose lowest temperature is less than 77K. These shields, which typically operate at temperatures between that of LN2 and 40K, block thermal radiation from higher temperatures from reaching lower temperature cryogenic components or fluids. Since the heat radiated from...

Cryogenic Treatment of Materials

F.J. Diekman Controlled Thermal Processing, Inc. info@metal-wear.com Cryogenic Processing (also called cryogenic treatment, and incorrectly “cryogenic tempering”) is a process that uses cryogenic temperatures to modify materials to enhance their performance. Cryogenic Processing involves the slow reduction in temperature of the material to at least -300°F (-185°C) and holding the...

Cryogenics in Space

Peter Kittel University of California-Berkeley pkittel@cal.berkeley.edu Space Cryogenics is the application of cryogenics to space missions. These applications fall into two broad areas, supporting space science missions and supporting the space transportation infrastructure. Science applications: The atmosphere is opaque to much of the electro-magnetic spectrum. In space, the absence of...

Cryosurgery

Review of Cryosurgery Boris Rubinsky, PhD Hebrew University School of Science and Engineering Research Center for Biomedical Engineering 78b Ross Building Givat Ram, Jerusalem 91904 Israel rubinsky@cs.huji.ac.il as published in Annual Review of Biomedical Engineering, August 2000, Vol. 2, pp. 157-187. Abstract: Cryosurgery is a surgical technique that employs freezing...

Liquefied Natural Gas

Liquefied Natural Gas as it relates to the Field of Cryogenics John W. Bonn VJ Systems, LLC johnbonn@vjsystems-lic.com Today the world is looking for a cleaner fuel and Liquefied Natural Gas (LNG) plays a large part in achieving this goal. LNG in a liquid form is at -162°C (-259°F) and...

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...