Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Reviving SMES, One Niche at a Time

Many projects in applied superconductivity hold great promise for the energy sector, but have failed to catch on due to cost, competition from established systems, perceived risk and other factors. Among them is Superconducting Magnetic Energy Storage (SMES), a system that stores energy in the form of a magnetic field....

IRAS Maximizes Cryogenic Process Efficiency

Integrated Refrigeration and Storage (IRAS) is a technology to help maximize efficiency of spaceport cryogenic processes by integrating modern cryogenic refrigeration units with liquid storage vessels. Brayton cycle helium refrigerators are available in a range of capacities and temperatures, with demonstrated high efficiency and low maintenance. In an IRAS system,...

Zero Boiloff Tank Experiments aboard ISS

Affordable and reliable cryogenic fluid storage for propellant or life support systems is integral to all phases of NASA’s projected space and planetary expeditions. One challenge facing engineers is self-pressurization. It can be caused by the cryogen vaporization that results from heat leaks into a tank from its surroundings and...

New Superconducting Undulators Key to Next-Gen XFELs

Researchers at the US Department of Energy’s Lawrence Berkeley National Laboratory and Argonne National Laboratory (CSA CSM) have collaborated to design, build and test two superconducting undulator devices that could make X-ray lasers more powerful, versatile, compact and durable. In tests, the prototype SCUs successfully produced stronger magnetic fields than...

Sending out an SRF, Fermilab and Northwestern Partner for Applied Superconductivity Center

Northwestern University and the Department of Energy’s Fermi National Accelerator Laboratory (CSA CSM) have established a new research center where scientists will focus on advancing superconductivity, hoping to produce societal gains in the fields of particle physics, solid-state physics, materials science, medicine, energy and environmental sciences. Included are investigations into...

New Form of Matter Is Supersolid

An MIT research team has created a supersolid, a new form of matter that combines both form and viscosity-free flow—properties that most people consider mutually exclusive. The team formed the new material from a Bose-Einstein condensate (BEC), suspending the superfluid gas in an ultrahigh vacuum and then manipulating the sample...

Latest in Defining Cryogenics

Dewar

A dewar is a type of cryostat named after Sir James Dewar, the researcher who first developed the concept of a vacuum insulated container with silvered walls to reflect thermal radiation. Dewar was the first to liquefy hydrogen, and he created the device to store his discovery. The thermos bottle...

Stirling and Gifford-McMahon Cryocoolers

Stirling and Gifford-McMahon (GM) cryocoolers are two of the most commonly used cryocoolers in cryogenics. Both devices have a significant industrial base and operate at a wide range of temperatures and capacities. The thermodynamic cycles for both of these cryocoolers are quite similar. The Stirling cycle consists of a compressor,...

Liquefied Natural Gas (LNG)

A significant commercial application of cryogenics is the liquefaction, transport and storage of natural gas. Liquefied Natural Gas (LNG) is generally 95 percent methane with a few percent ethane and much lower concentrations of propane and butane. LNG liquefies at 111.6 K. Unlike many applications of cryogenics, the motivation for...

Latest in Cryo Central

Cryogenic Electronics

Randall Kirschman, consulting physicist, Mountain View, California ExtElect@gmail.com Cryogenic electronics—the operation of electronic devices, circuits, and systems at cryogenic temperatures—has been a valuable technology for decades. Cryogenic electronics (also referred to as low-temperature electronics, or cold electronics) can be based on semiconductive devices, on superconductive devices, or on a combination...

Particle Physics: High Energy Physics

Cryogenics and High-Energy Physics 1. From symmetry magazine: http://www.symmetrymagazine.org/cms/?pid=1000627: Cryogenics is the study of how materials behave at temperatures near absolute zero. In high-energy particle accelerators, such frigid temperatures reduce the electrical resistance of wires in superconducting magnets, increasing the magnet strength and allowing faster particle acceleration. The same holds...

HTS Degaussing Systems

From the Spring 2009 issue of Cold Facts (Volume 25, Number 2): Thanks to a joint project by the US Navy and a number of industry partners, high temperature superconducting (HTS) technology is now at the heart of an advanced degaussing system aboard the USS Higgins at the naval station...

Magnetic Resonance Imaging

From http://www.superconductors.org: An area where superconductors can perform a life-saving function is in the field of biomagnetism. Doctors need a non-invasive means of determining what’s going on inside the human body. By impinging a strong superconductor-derived magnetic field into the body, hydrogen atoms that exist in the body’s water and...

Latest in Ask the Experts

Seeking alloy that keeps elastic property down to 10K

I am looking for a metal (alloy) that supports high temperatures (at least 1600K) and keeps its elastic property at low temperatures down to 10K. Rhenium is a good one because it does not become brittle. But it is quite expensive. Pure tungsten and molybdenum enter in the brittle regime...

Searching for a freezer that does not need electricity

I’m student of University of Barcelona. We do technical cryogenic research and we are searching for a cryogenic portable freezer that does not need electricity. We can’t find any company that offers something like this. The product we are looking for is the typical portable freezer for food or drinks...

FEP Encapsulated O rings in the cryogenic process

Can you please advise if FEP Encapsulated O rings are used within the cryogenic process and what materials? I have been asked by my company to write about FEP Encapsulated O rings for a training seminar.

Need material property data for polycrystalline / sintered ceramics

I am a ME grad student currently working on the design of a detector array / focal plate of a scientific space instrument operating at a temperature of about -80…-100°C. Although this is not in the cryogenic temperature range, I would like to address two questions to you as the...

CATEGORIES