Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Boundary-Layer Detection in a Cryogenic Wind Tunnel Using Temperature-Sensitive Paint Coupled with a Carbon Nanotube Heating Layer

For engineers developing and designing new aerospace vehicle concepts, the determination of the transition from laminar flow to turbulent flow on an aerodynamic surface is of vital importance. It can be critical for accurate drag estimation, for example, and there are efforts underway to design wing shapes and vehicle concepts...

Nanoparticles Key to Tissue Preservation

A multidisciplinary research team has discovered a groundbreaking process to cool and rewarm large-scale animal heart valves and blood vessels preserved at very low temperatures. The discovery could result in a major step forward in saving millions of human lives by increasing the availability of organs and tissues for transplantation,...

APS Joins SCOAP3 Consortium

CERN, the European Organization for Nuclear Research, and the American Physical Society (APS) have entered into an agreement through SCOAP3 to provide open access to high-energy physics articles published in APS journals. The partnership, which begins in January 2018, covers articles from Physical Review C, Physical Review D and Physical...

NCIS Bungles Investigation, Conflates Cryogenics and Cryonics

A recent episode NCIS, a popular CBS police procedural, featured a villain who killed his victims with liquid nitrogen, interring them alive inside a homemade cryonics chamber. During the big reveal, the NCIS writers conflate cryonics with cryogenics, using one of the show's trope scientific experts to present the latter...

CSA Board Member Joins Superconductivity Center at FSU

Florida State University has hired Lance Cooley, CSA board member and a scientist at the Fermi National Accelerator Laboratory (CSA CSM), to join the Applied Superconductivity Center (ASC) at the FSU-based National High Magnetic Field Laboratory. He will also have a faculty appointment in the Department of Mechanical Engineering at...

Physicists Observe Negative Mass in Bose-Einstein Condensate

Washington State University physicists have created a fluid with negative mass. Push it, and unlike every physical object in the known world, it doesn’t accelerate in the direction it was pushed. It accelerates backward. Led by Peter Engels, WSU professor of physics and astronomy, the researchers generated the conditions for...

Latest in Defining Cryogenics

Transfer Lines

Transfer lines may in some real sense be thought of as the cryogenic fluid analogy of current leads. While current leads carry electrical power to where it’s required in a cryogenic system, transfer lines do the same with cryogenic fluids. Transfer lines range in complexity from very simple U-tubes containing...

Zero Boiloff

Zero Boil Off cryostats are those that contain liquid cryogens but are designed to eliminate or vastly reduce the boil off of the liquid. These cryostats combine some of the advantages of Cryogen-Free systems (e.g. ease of use and long operational lifetime) with the advantages associated with a reservoir of liquid...

Cryomodule

Cryomodule is a term that is most commonly used to refer to cryostats that contain superconducting radio frequency (SRF) cavities. Such cavities are used to accelerate charged particle beams and are a major component of modern particle accelerators. Using the term cryomodule to refer to cryostats containing SRF cavities appears...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Need help comparing chest freezers and upright freezers

Currently we use in our Biobank an upright -80 freezer to store all our samples. We are planning to buy a fully automated bio-repository storage that will do the picking of samples under restricted conditions. But in the meantime I foresee that we have to pick the samples manually. The...

Need recommendations for cryogenic vials

I am looking into standardizing our range of bio storage tubes (cryogenic vials). These will be for both blood and tissue samples and their derivatives. Any recommendations, comments on Micronics, Nalgene, Nunc and or others that are suitable for long term -80 C and -196 C storage, DNA/RNA suitable, would...

We need a custom machine for flash freezing of water

We are an ice making company and have started a new project, which is related to flash freezing of water. It is based on cryogenics technology and we need a custom made machine. I would kindly ask you to pass me a few companies who would be interested in such...

Looking for a pump suitable for cold liquids

I would like to construct a small cooling circuit (appr. 50 x 50 cm) pumping liquid at a temperature down to -120°C from a cold reservoir to the specimen to be cooled. The tubes and connections are not a problem, but does somebody know a pump (suction/compression for circulation) suitable...

CATEGORIES