CGA Announces New Process Safety Committee
In an email to its members, the Compressed Gas Association announced the formation of a new Process Safety Committee to address process safety concerns and gaps that affect the industrial gas industry.
ADVERTISEMENT
Six Things You Might Not Know About Hydrogen
October 8th is National Hydrogen and Fuel Cell Day. To celebrate, here are a few things you might not know about hydrogen and fuel cells.
Auguste Acquires Taylor-Wharton’s European Operations
Auguste Cryogenics SK s.r.o. has acquired Taylor-Wharton International’s European Operations, including a cryogenic pressure vessel manufacturing facility, Taylor-Wharton Slovakia s.r.o., and the related warehouse and office complex of Taylor-Wharton Germany GmbH. Auguste says all employees have been retained and that the facilities will continue to operate under the Taylor-Wharton brand...
XFEL Commissions New X-ray Laser
Engineers at European XFEL, a large international research facility with 11 European member countries, have begun commissioning a 3.4-km-long underground X-ray laser. When operational, the laser will generate extremely short and bright X-ray light flashes that will enable new views of the structure and fast processes of the nanocosmos. Applications...
2016 Nobel Prize in Physics Awarded
The Royal Swedish Academy of Sciences awarded the 2016 Nobel Prize in Physics to David J. Thouless, F. Duncan M. Haldane and J. Michael Kosterlitz, three laureates who have used advanced topological methods to study unusual phases of matter, such as superconductors, superfluids or thin magnetic films. Thanks to their...
Spallation Neutron Source Marks a Decade of Research
Oak Ridge National Laboratory (CSA CSM) celebrated a decade of research at its Spallation Neutron Source (SNS) with an event on September 22. The SNS features a linear accelerator and accumulator ring. It sent the first protons to its one-of-a-kind mercury target in April 2006 and over the last decade...
ADVERTISEMENT
Mixed Refrigerant Cycles
Most cryogenic refrigeration systems, both large scale systems and cryocoolers, use helium as a working fluid. There are a number of advantages to helium, not the least of which is that helium remains a fluid down to the lowest achievable temperatures. In order to freeze helium, pressures of over 20...
Fountain Pumps and He II Phase Separators
Helium II (He II), the second liquid phase of the 4He isotope described in this column in Cold Facts Spring 2010 (http://2csa.us/he2), can be modeled as consisting of two interpenetrating fluids. One, the superfluid component, has zero viscosity and entropy and the other, the normal fluid component, has nonzero viscosity...
Turboexpanders
A vital technology in the refrigerators and liquefiers described in Cold Facts Volume 31 Number 3 is that of turboexpanders. These devices are rotating machines in which the process fluid (e.g., helium) does work against the turboexpander while moving from high pressure to a lower pressure and thus is cooled....
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Any experience with Tungsten or Tantalum metal springs in a low temp environment?
I would like to use metal springs made of Tungsten or Tantalum in low temperature environment. Does anybody have any experience with such springs? More precisely, I would like to make compression springs by rolling tungsten or tantalum wire on a rod. I expect that, typically, the spring constant will...
Standards & specifications for pipe & tube couplings
I am interested in finding out more about cryogenic applications and what standards, specifications and test methods (ASTM, etc.) are required for qualification of pipe and tube couplings.
Looking for a test house to test the static coefficient of friction under cryogenic conditions
I am looking to find a test house that is capable of testing the static coefficient of friction under cryogenic conditions. We can be flexible on most of the test parameters, including the test coupon configuration, but we’re looking for a test house that can provide the following test environment:...
Approximating pressure changes over time in cryogenic cylinders
I am an Air Resources Engineer with the California Air Resources Board (CARB). My senior management has asked me to investigate approximating pressure changes over time in cryogenic cylinders that contain LNG. So far, I have taken a stab at the problem, seeking to take a back-of-the-envelope approach (as directed...