Accelerator mass spectrometry, an accelerator-driven form of carbon dating that requires only a tiny sample of the material, is advancing everything from archaeology to personalized medicine.
One-eighth of the Large Hadron Collider (LHC) dipole magnets have reached the energy they'll need to operate in 2015. Engineers at CERN powered 154 superconducting magnets to a current of around 11,000 amps. This is about 1,000 times greater than an average household appliance and is required to make the...
NASA Glenn Research Center announces the 2015 Space Cryogenics Workshop (SCW), a division of the Cryogenic Society of America. All aspects of space cryogenics will be represented, with an emphasis on work related to previous missions as well as future research.
At the August 14 CSA Board meeting held during the Applied Superconductivity Conference in Charlotte NC, the four directors recently elected by the society's membership were certified.
Dr. Paul Michael Grant assesses the application of superconductivity within the electric power sector, asking, "Is there a 'hot track' upward for both applications of today's superconductors and future transition temperatures beyond 200K as well?"
This year’s Applied Superconductivity Conference, ASC14, hosted 1,523 attendees from 36 countries, with 791 papers submitted for peer review. Held at the Charlotte NC Convention Center, August 10-15, the event’s theme was “Race to Energy Efficiency,” incorporating the racecar theme of its proximity to the NASCAR Hall of Fame, which...
A dewar is a type of cryostat named after Sir James Dewar, the researcher who first developed the concept of a vacuum insulated container with silvered walls to reflect thermal radiation. Dewar was the first to liquefy hydrogen, and he created the device to store his discovery. The thermos bottle...
Stirling and Gifford-McMahon (GM) cryocoolers are two of the most commonly used cryocoolers in cryogenics. Both devices have a significant industrial base and operate at a wide range of temperatures and capacities. The thermodynamic cycles for both of these cryocoolers are quite similar. The Stirling cycle consists of a compressor,...
A significant commercial application of cryogenics is the liquefaction, transport and storage of natural gas. Liquefied Natural Gas (LNG) is generally 95 percent methane with a few percent ethane and much lower concentrations of propane and butane. LNG liquefies at 111.6 K. Unlike many applications of cryogenics, the motivation for...
F.J. Diekman Controlled Thermal Processing, Inc. info@metal-wear.com Cryogenic Processing (also called cryogenic treatment, and incorrectly “cryogenic tempering”) is a process that uses cryogenic temperatures to modify materials to enhance their performance. Cryogenic Processing involves the slow reduction in temperature of the material to at least -300°F (-185°C) and holding the...
Peter Kittel University of California-Berkeley pkittel@cal.berkeley.edu Space Cryogenics is the application of cryogenics to space missions. These applications fall into two broad areas, supporting space science missions and supporting the space transportation infrastructure. Science applications: The atmosphere is opaque to much of the electro-magnetic spectrum. In space, the absence of...
Review of Cryosurgery Boris Rubinsky, PhD Hebrew University School of Science and Engineering Research Center for Biomedical Engineering 78b Ross Building Givat Ram, Jerusalem 91904 Israel rubinsky@cs.huji.ac.il as published in Annual Review of Biomedical Engineering, August 2000, Vol. 2, pp. 157-187. Abstract: Cryosurgery is a surgical technique that employs freezing...
Liquefied Natural Gas as it relates to the Field of Cryogenics John W. Bonn VJ Systems, LLC johnbonn@vjsystems-lic.com Today the world is looking for a cleaner fuel and Liquefied Natural Gas (LNG) plays a large part in achieving this goal. LNG in a liquid form is at -162°C (-259°F) and...
I have been making bells for a few years out of Bell Bronze, 87% Copper. Would cryogenic freezing have any effect on the tone of a bell if I had it treated after casting? Your help would be appreciated.
I am interested in the thermal conductivity and other properties of low temperature superconductors. Specifically I am interested in materials like Niobium, Tantalum, Lead and Tin. Would you know of a publication that dealt with thermal properties in general and also gave specific data on these materials?