Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

First LHC magnets prepped for restart

One-eighth of the Large Hadron Collider (LHC) dipole magnets have reached the energy they'll need to operate in 2015. Engineers at CERN powered 154 superconducting magnets to a current of around 11,000 amps. This is about 1,000 times greater than an average household appliance and is required to make the...

Save the Date for the 2015 Space Cryogenics Workshop

NASA Glenn Research Center announces the 2015 Space Cryogenics Workshop (SCW), a division of the Cryogenic Society of America. All aspects of space cryogenics will be represented, with an emphasis on work related to previous missions as well as future research.

CSA Board Certifies Newly Elected Directors

At the August 14 CSA Board meeting held during the Applied Superconductivity Conference in Charlotte NC, the four directors recently elected by the society's membership were certified.

Superconductivity: Will It Be Coming in from the Cold?

Dr. Paul Michael Grant assesses the application of superconductivity within the electric power sector, asking, "Is there a 'hot track' upward for both applications of today's superconductors and future transition temperatures beyond 200K as well?"

ASC Attendees Spend Event-Filled Week

This year’s Applied Superconductivity Conference, ASC14, hosted 1,523 attendees from 36 countries, with 791 papers submitted for peer review. Held at the Charlotte NC Convention Center, August 10-15, the event’s theme was “Race to Energy Efficiency,” incorporating the racecar theme of its proximity to the NASCAR Hall of Fame, which...

Historical Retrospective: CSA’s Birth in the Early Days of the Space Age

We’ve always heard that CSA began in 1964 with the growing need for cryogenics in the burgeoning Space Age. We decided to take a look at the unfolding of this phenomenon in the pages of Cryogenic Technology, “the Journal of the Cryogenic Society of America,” Volume 1, 1964-1965.

Latest in Defining Cryogenics

Regenerators

Regenerators or regenerative heat exchangers are a key component of cryocoolers such as pulse tube cryocoolers (Cold Facts, August 2014). Regenerator performance greatly affects the coefficient of performance of cryocoolers. Improvements in regenerator design and, in particular, regenerator materials have been an important factor in the improvement of the performance...

Pulse Tube Cryocoolers

The development of pulse tube cryocoolers has been a significant topic of research and development over the past 20 or so years. Pulse tube cryocoolers have a number of advantages over other types of cryocoolers and are now available commercially. In order to understand pulse tube cryocoolers, it’s best to...

Thermal Expansion

Thermal expansion refers to the change in size (length or volume) that a material undergoes as its temperature changes. In cryogenic systems this effect can be quite large and must be allowed for in the design. In isotropic materials, which include most engineering materials, the thermal expansion is the same...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...

Separated layers of ice over a pipe

I want to know that why there are different layers of ice over a pipe carrying a cryogenic fluid, each layer separated with clear marks / lines? What do these layers signify?

Using nitrogen as a cryogen

Is it possible to achieve -200˚C using nitrogen as a cryogen?

CATEGORIES