Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Cryocoolers to Monitor Global Surface Temperatures from Space

The Cryocooler Development and Engineering Group at Airbus Defence and Space, formerly known as Astrium, has delivered the first of two space cryocooler systems, scheduled to launch in mid-2015 on the European Space Agency’s twin Sentinel 3 satellites.

The Rebirth of CSA

In 1984, 20 years after its founding, the Cryogenic Society of America was re-incorporated in the state of Illinois under new leadership. President Romuald (Ray) Szara explained the changes in a letter to the membership quoted in Vol. 1, No. 1 of the new CSA magazine, Cold Facts.

The Birth of CSA

The Cryogenic Society of America was founded in 1964. David Carse, the first national President of CSA, traced the “history” of the newly formed body in his article “Cryo Comment,” published in Volume 1, No. 1 of the society’s journal, Cryogenic Technology.

Report on World Congress of the ISC

The 17th World Congress of the International Society of Cryosurgery was held in Bali, Indonesia, last December. At the opening ceremony, Prof. Dr. Akmal Taher, Sp.U(K), Director General of the Ministry of Health of the Republic of Indonesia, welcomed the delegates. A total of 109 delegates from four continents attended...

Northrop Grumman successfully completes spacecraft critical design review for JWST

Northrop Grumman Corporation successfully passed the last significant mission design milestone for NASA's James Webb Space Telescope, the spacecraft Critical Design Review (CDR), five months ahead of schedule, following the replan.

16th Intl. Conference on RF Superconductivity held in Paris

Ah, Paris! The City of Lights was the setting for the SRF 2013 conference, held Sept. 22-27. The conference was the latest continuation of a series started in 1980 at Karlsruhe as a small workshop, and has grown to 412 attendees, featuring an exhibition with 20 industrial exhibitors, and offering...

Latest in Defining Cryogenics

Transfer Lines

Transfer lines may in some real sense be thought of as the cryogenic fluid analogy of current leads. While current leads carry electrical power to where it’s required in a cryogenic system, transfer lines do the same with cryogenic fluids. Transfer lines range in complexity from very simple U-tubes containing...

Zero Boiloff

Zero Boil Off cryostats are those that contain liquid cryogens but are designed to eliminate or vastly reduce the boil off of the liquid. These cryostats combine some of the advantages of Cryogen-Free systems (e.g. ease of use and long operational lifetime) with the advantages associated with a reservoir of liquid...

Cryomodule

Cryomodule is a term that is most commonly used to refer to cryostats that contain superconducting radio frequency (SRF) cavities. Such cavities are used to accelerate charged particle beams and are a major component of modern particle accelerators. Using the term cryomodule to refer to cryostats containing SRF cavities appears...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...

Separated layers of ice over a pipe

I want to know that why there are different layers of ice over a pipe carrying a cryogenic fluid, each layer separated with clear marks / lines? What do these layers signify?

Using nitrogen as a cryogen

Is it possible to achieve -200˚C using nitrogen as a cryogen?

CATEGORIES