Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Cryocoolers to Monitor Global Surface Temperatures from Space

The Cryocooler Development and Engineering Group at Airbus Defence and Space, formerly known as Astrium, has delivered the first of two space cryocooler systems, scheduled to launch in mid-2015 on the European Space Agency’s twin Sentinel 3 satellites.

The Rebirth of CSA

In 1984, 20 years after its founding, the Cryogenic Society of America was re-incorporated in the state of Illinois under new leadership. President Romuald (Ray) Szara explained the changes in a letter to the membership quoted in Vol. 1, No. 1 of the new CSA magazine, Cold Facts.

The Birth of CSA

The Cryogenic Society of America was founded in 1964. David Carse, the first national President of CSA, traced the “history” of the newly formed body in his article “Cryo Comment,” published in Volume 1, No. 1 of the society’s journal, Cryogenic Technology.

Report on World Congress of the ISC

The 17th World Congress of the International Society of Cryosurgery was held in Bali, Indonesia, last December. At the opening ceremony, Prof. Dr. Akmal Taher, Sp.U(K), Director General of the Ministry of Health of the Republic of Indonesia, welcomed the delegates. A total of 109 delegates from four continents attended...

Northrop Grumman successfully completes spacecraft critical design review for JWST

Northrop Grumman Corporation successfully passed the last significant mission design milestone for NASA's James Webb Space Telescope, the spacecraft Critical Design Review (CDR), five months ahead of schedule, following the replan.

16th Intl. Conference on RF Superconductivity held in Paris

Ah, Paris! The City of Lights was the setting for the SRF 2013 conference, held Sept. 22-27. The conference was the latest continuation of a series started in 1980 at Karlsruhe as a small workshop, and has grown to 412 attendees, featuring an exhibition with 20 industrial exhibitors, and offering...

Latest in Defining Cryogenics

Regenerators

Regenerators or regenerative heat exchangers are a key component of cryocoolers such as pulse tube cryocoolers (Cold Facts, August 2014). Regenerator performance greatly affects the coefficient of performance of cryocoolers. Improvements in regenerator design and, in particular, regenerator materials have been an important factor in the improvement of the performance...

Pulse Tube Cryocoolers

The development of pulse tube cryocoolers has been a significant topic of research and development over the past 20 or so years. Pulse tube cryocoolers have a number of advantages over other types of cryocoolers and are now available commercially. In order to understand pulse tube cryocoolers, it’s best to...

Thermal Expansion

Thermal expansion refers to the change in size (length or volume) that a material undergoes as its temperature changes. In cryogenic systems this effect can be quite large and must be allowed for in the design. In isotropic materials, which include most engineering materials, the thermal expansion is the same...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Specs and info on turbo expanders

I am a fourth year chemical engineering student doing a design project for the liquefaction of natural gas to DME and we are using a turbo expansion unit. I was wondering whether you would send me some specs and any additional information on turbo expanders that I could use as...

Colleges that offer cryogenic studies

Would you happen to know of any colleges in the US that offer cryogenics as a major? If not, should I major in something like biology or physics before, then branch off to the field of cryogenics? Any information that you could give me would be greatly appreciated, considering this...

Sudden loss of vacuum in LHe storage dewar

I’m trying to find data on what happens when a 100 Liter LHe storage dewar experiences a catastrophic failure such as a sudden loss of vacuum. If anyone has any info on this subject, it would be very helpful.

Data on hardness of Indium?

Where can I find experimental data on the hardness of Indium, as a function of temperature, as well as any existing data on the thermal contact conductance of junctions containing Indium foil, also as a function of temperature?

CATEGORIES