Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Cryocoolers to Monitor Global Surface Temperatures from Space

The Cryocooler Development and Engineering Group at Airbus Defence and Space, formerly known as Astrium, has delivered the first of two space cryocooler systems, scheduled to launch in mid-2015 on the European Space Agency’s twin Sentinel 3 satellites.

The Rebirth of CSA

In 1984, 20 years after its founding, the Cryogenic Society of America was re-incorporated in the state of Illinois under new leadership. President Romuald (Ray) Szara explained the changes in a letter to the membership quoted in Vol. 1, No. 1 of the new CSA magazine, Cold Facts.

The Birth of CSA

The Cryogenic Society of America was founded in 1964. David Carse, the first national President of CSA, traced the “history” of the newly formed body in his article “Cryo Comment,” published in Volume 1, No. 1 of the society’s journal, Cryogenic Technology.

Report on World Congress of the ISC

The 17th World Congress of the International Society of Cryosurgery was held in Bali, Indonesia, last December. At the opening ceremony, Prof. Dr. Akmal Taher, Sp.U(K), Director General of the Ministry of Health of the Republic of Indonesia, welcomed the delegates. A total of 109 delegates from four continents attended...

Northrop Grumman successfully completes spacecraft critical design review for JWST

Northrop Grumman Corporation successfully passed the last significant mission design milestone for NASA's James Webb Space Telescope, the spacecraft Critical Design Review (CDR), five months ahead of schedule, following the replan.

16th Intl. Conference on RF Superconductivity held in Paris

Ah, Paris! The City of Lights was the setting for the SRF 2013 conference, held Sept. 22-27. The conference was the latest continuation of a series started in 1980 at Karlsruhe as a small workshop, and has grown to 412 attendees, featuring an exhibition with 20 industrial exhibitors, and offering...

Latest in Defining Cryogenics

Dilution Refrigerators

Dilution refrigerators are a common technique for reaching temperatures below 1K, particularly where continuous cooling at these temperatures is required. Helium exists in two stable isotopes: 4He and 3He. Naturally occurring 3He is extremely rare, constituting less than 1 part per million of helium gas. However, 3He can be manufactured,...

Oxygen Deficiency Hazards

Oxygen Deficiency Hazards (ODH) are a significant safety issue in cryogenic facilities. ODH occurs when inert gases such as nitrogen, helium or argon displace room air and thus lower the percentage of oxygen in the space below that required for human life. OSHA defines an area as oxygen deficient if...

Kelvin Temperature Scale

The Kelvin temperature scale is the principal temperature scale used in cryogenics and science. The kelvin is also one of the seven base units in the Système International d’Unités (SI) and is the unit of thermodynamic temperature. Thermodynamic temperature is a fundamental physical quantity (like mass, length or electrical current)...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Power usage: cryogenic systems vs. regular refrigerators

A recent project highlighted to me that closed cycle cryogenic cooling systems use far more electrical power to reduce temperatures by a few watts than regular refrigerators. I am sure it must be something to do with the extra difficulty of removing the heat from the liquid nitrogen or similar...

Redundancy strategies for mechanical -80C freezers

I was wondering what kind of redundancy strategies are people using for their mechanical -80C freezers? I am aware of the following. Please add if you are doing something different. 1) 1 Backup freezer for every 10 freezers – Empty and maintained at -80C at all times 2) Backup C02...

Safety guidelines for handling cryo vessels of nitrogen

I am looking for any safety guidelines for handling cryogenic vessels of nitrogen indoors and outdoors. I am especially interested in recommendations for area monitors to detect leaks, flow detection devices, etc.

Method to move components in a cryogenic environment

Does anyone know of a method with which to reliably move components in a cryogenic environment? We are interested in moving detectors in a cryogenically cooled (2K) vacuum chamber, which is contained within a larger cryostat/isolation vacuum with thermal shields. As the desired horizontal or vertical displacement is between 10...

CATEGORIES