Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

BS&B Safety Systems Accelerates Service to OEMs

OEMs in virtually every market, from aerospace and automotive to refrigeration and fire protection, rely on rupture disk devices for pressure relief and pressure release of gases and liquids. The challenge of time faces all product designers; how do we get a custom solution in an acceptable timeframe? Now, at least...

The Cryomech PT205: A Compact Cryocooler with a Wide Range of Applications

In today’s rapidly evolving technological landscape, the demand for efficient and compact cryocoolers is more critical than ever. A wide range of applications increasingly require high performance cooling systems that can seamlessly integrate into limited spaces. Smaller cryocoolers prove invaluable in these contexts, offering the precision and reliability necessary to...

CO2Meter’s Critical Gas Safety Solution

CO2Meter has long been recognized for its remote oxygen depletion safety alarm, which warns staff before they enter areas with dangerously low oxygen levels caused by pressurized gas leaks. Pressurizing a gas in a tank or cylinder provides a convenient way to transport and store it. Flower shops use helium cylinders...

Continuous Cryogenic Pellet Injection System Developed for Tokamak Fueling

A continuous cryogenic pellet injection system for tokamak fueling has been developed by a joint research team from the Hefei Institutes of Physical Science of the Chinese Academy of Sciences. It overcame technical challenges related to cryogenic ice formation, pellet cutting and pellet launching. Cryogenic pellet injection is a cutting-edge technique...

Web Industries to Showcase Precision-Formatting Solutions at JEC World 2025

Aerospace structures, parts, and components Satellite, spacecraft, and launch cryogenic multi-layer insulation (MLI) Urban mobility and electric vertical takeoff and landing (eVTOL) aircraft Wind turbine blades Oil, gas, and hydrogen/carbon capture pipes Battery energy storage systems (BESS) The company’s contract services include high-speed slitting, rewinding, spooling, chopping, seaming, and laminating,...

Incoming CERN Director-General Mark Thomson Outlines His Future Priorities

CSA April Newsletter SponsorHigh-performance, highly reliable, long-lasting storage tanks for transporting hydrogen & helium molecules around the globe.https://www.gardnercryo.com [Contact Jamie Luedtke for Newsletter Sponsorship] Home About Membership Login Calendar Cold Facts Buyer’s Guide News Publications Cryo Careers Resources Donate Join now Log in Cryogenic Society of America, Inc. Twitter Facebook...

Latest in Defining Cryogenics

Transfer Lines

Transfer lines may in some real sense be thought of as the cryogenic fluid analogy of current leads. While current leads carry electrical power to where it’s required in a cryogenic system, transfer lines do the same with cryogenic fluids. Transfer lines range in complexity from very simple U-tubes containing...

Zero Boiloff

Zero Boil Off cryostats are those that contain liquid cryogens but are designed to eliminate or vastly reduce the boil off of the liquid. These cryostats combine some of the advantages of Cryogen-Free systems (e.g. ease of use and long operational lifetime) with the advantages associated with a reservoir of liquid...

Cryomodule

Cryomodule is a term that is most commonly used to refer to cryostats that contain superconducting radio frequency (SRF) cavities. Such cavities are used to accelerate charged particle beams and are a major component of modern particle accelerators. Using the term cryomodule to refer to cryostats containing SRF cavities appears...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Any experience with Tungsten or Tantalum metal springs in a low temp environment?

I would like to use metal springs made of Tungsten or Tantalum in low temperature environment. Does anybody have any experience with such springs? More precisely, I would like to make compression springs by rolling tungsten or tantalum wire on a rod. I expect that, typically, the spring constant will...

Standards & specifications for pipe & tube couplings

I am interested in finding out more about cryogenic applications and what standards, specifications and test methods (ASTM, etc.) are required for qualification of pipe and tube couplings.

Looking for a test house to test the static coefficient of friction under cryogenic conditions

I am looking to find a test house that is capable of testing the static coefficient of friction under cryogenic conditions. We can be flexible on most of the test parameters, including the test coupon configuration, but we’re looking for a test house that can provide the following test environment:...

Approximating pressure changes over time in cryogenic cylinders

I am an Air Resources Engineer with the California Air Resources Board (CARB). My senior management has asked me to investigate approximating pressure changes over time in cryogenic cylinders that contain LNG. So far, I have taken a stab at the problem, seeking to take a back-of-the-envelope approach (as directed...

CATEGORIES