Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Cryogenics at the European Spallation Source

The European Spallation Source (ESS) is an intergovernmental project building a multidisciplinary research laboratory based upon the world’s most powerful neutron source. The facility will be built in Lund, Sweden. The ESS will use a linear accelerator (linac), which will deliver protons with 5 MW of power to the target...

Cryogenics Conference Moves to Dresden

Held in Dresden, Germany, for the first time, September 11-14, the international Cryogenics conference attracted 150 participants from 23 nations with 54 lectures and 28 posters presented. The exhibition comprised 18 companies. Students from the European Course of Cryogenics, sponsored by TU Dresden, which was held in the city at...

UH wind turbine superconductivity research project wins additional funding

A University of Houston engineering researcher and his team have received additional funding from the US Department of Energy (DOE) for a wind energy project that involves using superconducting wire to generate and transport electricity.

Fermilab scientists selected as APS fellows

Five Fermilab scientists have been named fellows of the American Physical Society, a distinction awarded each year to no more than one-half of 1 percent of current APS members by their peers.

Nexans and AMSC introduce fault current limiter for North American utilities

AMSC, a global solutions provider serving wind and grid leaders, and Nexans, an expert in the cable industry (both CSA Corporate Sustaining Members), recently introduced to the North American market a medium voltage superconductor fault current limiter (SFCL) solution that is designed to meet many of the challenges caused by...

“Crowning” the ITER cryostat from below solves columnar design problem

Columns are as old as civilization: for thousands of years, they have provided architects and engineers with a simple and sturdy solution to support heavy loads while leaving room to move around on the ground below. This traditional and reliable solution was to be implemented in ITER.

Latest in Defining Cryogenics

Transfer Lines

Transfer lines may in some real sense be thought of as the cryogenic fluid analogy of current leads. While current leads carry electrical power to where it’s required in a cryogenic system, transfer lines do the same with cryogenic fluids. Transfer lines range in complexity from very simple U-tubes containing...

Zero Boiloff

Zero Boil Off cryostats are those that contain liquid cryogens but are designed to eliminate or vastly reduce the boil off of the liquid. These cryostats combine some of the advantages of Cryogen-Free systems (e.g. ease of use and long operational lifetime) with the advantages associated with a reservoir of liquid...

Cryomodule

Cryomodule is a term that is most commonly used to refer to cryostats that contain superconducting radio frequency (SRF) cavities. Such cavities are used to accelerate charged particle beams and are a major component of modern particle accelerators. Using the term cryomodule to refer to cryostats containing SRF cavities appears...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Information about a process called “cryogenically stretch-formed ss”

I am remembering in the 1970’s when astronauts were walking on the moon and carried oxygen in 300 ss bottles inside LN2 tanks which were filled and pressurized.

Small cryo-gun for our health service clinic

I am Assistant Director for Environmental Health & Safety at a university health service clinic.

Additional sealing materials besides PTFE or glass filled PTFE

I am an engineer looking to improve our solenoid valve sealing on cryogenic medias. I was wondering if you knew of materials other then PTFE or glass filled PTFE that could be used for sealing.

What is the temperature range of cryogenics?

Could you please tell me what is the temperature range of cryogenics? In other words, is -100°F considered cryogenic, or does it start lower? Could I expect to see some extended life in D2 stamping dies? What would the recipe be to achieve the desired results using cryogenics?

CATEGORIES