Ability Engineering receives National Board “R” Certificate of Authorization
Ability Engineering Technology, Inc. has received the National Board "R" Certificate of Authorization.
ADVERTISEMENT
Fire breaks out in Soudan mine
Fermilab Today reported on March 21 that a mine shaft fire that began in the Soudan Underground Mine last Thursday now appears to be out, though officials are unsure whether detectors for the MINOS experiment and the Cryogenic Dark Matter Experiment were damaged.
Airgas introduces new IQF freezer in Boston
Airgas announced a new addition to its FreezeRight line of cryogenic freezers at the International Boston Seafood Show on March 21.
Ad Astra and NASA JSC sign support agreement
Ad Astra Rocket Company and NASA Johnson Space Center (JSC) signed a Support Agreement on March 2 to collaborate on tasks related to space-based cryogenic magnet operations and electric propulsion systems for Ad Astra's VASIMR(R) technology.
Varian to collaborate with Synopsis on TCAD models for cryogenic ion implantation
Varian Semiconductor Equipment Associates, Inc. will collaborate with Synopsis, a leader in software and IP for semiconductor design and manufacturing, to develop Technology CAD (TCAD) models for cryogenic ion implantation.
Golden Pass LNG terminal approved to begin commercial operations
The Federal Energy Regulatory Commission (FERC) gave the approval to the Golden Pass LNG Terminal LLC and Golden Pass Pipeline LLC to begin commercial operations at the terminal in near Sabine Pass, Texas.
ADVERTISEMENT
Joule-Thomson Effect
The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...
Current Leads
One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...
Multilayer Insulation
Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
An Issue of Pressure and Flow Rate in a Supply Tank
Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...
Using MLI on VJ Line Joints or Cryo Storage Tanks
When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...
Separated layers of ice over a pipe
I want to know that why there are different layers of ice over a pipe carrying a cryogenic fluid, each layer separated with clear marks / lines? What do these layers signify?