UK, Japan extend research collaboration
The Japanese institute, RIKEN and the UK's Science and Technologies Facilities Council (STFC) have signed an agreement to extend their research collaboration projects until 2018.
ADVERTISEMENT
Air Liquide wins Best Innovator Award
Air Liquide has won the 2010 Best Innovator Award from AT Kearney in collaboration with the French economic daily "Les Echos."
Pier Oddone to serve another term as Fermilab director
Pier Oddone has been reappointed to a second term as the director of Fermi National Accelerator Laboratory.
Cavagna North America promotes Matt Gimmer
Matt Gimmer has been promoted to the newly created position of LPG Sales Manager at Cavagna North America.
FIBA Technologies approved for renewal of license
KGSC has approved FIBA Technologies Inc. for renewal of its seamless pressure vessel (ASME) and cylinder (DOT tube) manufacturing license for another three years.
Fermilab unveils new “Accelerators”
A new exhibit at Fermilab will help visitors understand the applications of accelerators. The "Accelerators for America's Future" exhibit is named after the DOE workshop that took place in October of 2009 and is located on the 15th floor of Wilson Hall.
ADVERTISEMENT
Cold Compressors
A common way to provide cooling below the normal boiling point of helium (4.2K) is to reduce the pressure above the bath of liquid helium, thus also reducing the bath’s equilibrium saturation temperature. For example, to produce a 1.8K bath of liquid helium, the saturation pressure has to be reduced...
Kapitza Conductance
Kapitza conductance refers to the heat transfer between a solid surface and a fluid that covers that surface. Fundamentally, it describes the inherent difficulty in transferring energy from a solid to the fluid covering the solid surface. This phenomenon was first observed by P. L. Kapitza in 1941 while studying...
Thermosyphons
A thermosyphon (or thermosiphon) is a device that transfers heat via natural convection in a fluid. The natural convection is driven by gravity with the colder, denser fluid flowing downhill and the warmer, less dense fluid flowing back up. Thus, thermosyphons connect an object to be cooled with a reservoir...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Any experience with G-10 in an extremely cold environment?
I have a cryostat with closed cycle cryocooler attached. The case is aluminum with a G-10 spacer between the case and a stainless steel bellows that supports the cryocooler.
Cryogenic sealant for LNG fueled buses?
Where can I find a cryogenic sealant for my LNG fueled buses?
Material/gel/epoxy to transfer cold temperature of a cryo-box to a test article
I’m on the hunt for a material/gel/epoxy that will transfer the cold temperature of a cryo-box to a test article. The cryo-box is curved and the test article is at the same curvature. I’m looking for something to put between them to make the surface of the test article as...
Manufacture of brazed aluminum heat exchangers: need consultant
I’m seeking a consultant with experience in the manufacture of brazed aluminum heat exchangers for cryogenic applications. Is there anyone you could recommend to me?