Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

NASA extends Pratt & Whitney Rocketdyne’s contract

NASA awarded a contract extension to Pratt & Whitney Rocketdyne, a United Technologies Corp. company. The extension will allow the company to continue development of the Common Extensible Cryogenic Engine (CECE), in an effort to support future lunar landing development.

Aqua Cure Ltd. awarded contract by US Air Force

Aqua Cure Ltd., Buffalo NY, has been awarded a $131,430 contract by the US Air Force for cryogenic vaporizers.

Hydrogen rocket technologies prepare for lift-off

An engine which is fueled by a mix of liquid oxygen and hydrogen has been developed to demonstrate advanced rocket technologies for future space vehicles, such as lunar vehicles, and has achieved a technical milestone in throttling capability.

Drell appointed acting director at SLAC

Persis Drell has been appointed acting director at the Stanford Linear Accelerator Center (SLAC); she was formerly deputy director. She succeeds Jonathan Dorfan who becomes assistant to the president, focusing on the relationship between Stanford University and SLAC.

Norman R. Augustine speaks at AAAS meeting

During the AAAS meeting held on February 18, 2008, Norman R. Augustine shared some challenging and interesting insight into the alarming state of science and technology research and education in the United States.

Tevatron sets a new record

The Tevatron set a new record on Monday, March 17, 2008 when it produced more particle collisions per second than ever before. Breaking the barrier of 3E32 for the first time, the Tevatron reached a record peak luminosity of 3.15 E32 cm^ -2 sec^ -1. The record came on the...

Latest in Defining Cryogenics

Transfer Lines

Transfer lines may in some real sense be thought of as the cryogenic fluid analogy of current leads. While current leads carry electrical power to where it’s required in a cryogenic system, transfer lines do the same with cryogenic fluids. Transfer lines range in complexity from very simple U-tubes containing...

Zero Boiloff

Zero Boil Off cryostats are those that contain liquid cryogens but are designed to eliminate or vastly reduce the boil off of the liquid. These cryostats combine some of the advantages of Cryogen-Free systems (e.g. ease of use and long operational lifetime) with the advantages associated with a reservoir of liquid...

Cryomodule

Cryomodule is a term that is most commonly used to refer to cryostats that contain superconducting radio frequency (SRF) cavities. Such cavities are used to accelerate charged particle beams and are a major component of modern particle accelerators. Using the term cryomodule to refer to cryostats containing SRF cavities appears...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Information on how the emissivity of the panel changes with air fouling?

I work at a facility with a large thermal vacuum chamber. We are using both nitrogen and helium shrouds.

In search of a calculation for designing a cryostat

I am a final year physics student at the University of Birmingham, and as part of a group I am currently designing a cryostat. One of the calculations I need to make (very soon!) is how much heat will be conducted down the walls. All information I have found so...

Safety of ethylene glycol and pressurized oxygen

We are reviewing the product design of liquid filled differential level gauges and want to insure that they meet the industry requirements. The former license owner had authorized that a fill fluid of ethylene glycol (68%) and distilled water (32%) could be used for oxygen service up to 500 psi....

Heat flux in case of vacuum loss on cryogenic surfaces?

Is there anyone who has information about the heat flux in case of vacuum loss on cryogenic surfaces?

CATEGORIES