SuperPower and ORNL deliver 2G wire
The world's first significant delivery of 2G wire was made possible by SuperPower and Oak Ridge National Laboratory, who were selected to receive a 2007 R&D 100 Award.
ADVERTISEMENT
NASA Plum Brook builds world’s largest vacuum chamber
The world's largest vacuum chamber has been built by NASA Plum Brook.
W. Vincent Liu wins Outstanding Young Researcher Award
W. Vincent Liu, Assistant Professor of Physics and Astronomy at the University of Pittsburgh, is the winner of the 2007 Outstanding Young Researcher Award of the Overseas Chinese Physics Association.
Dr. Steven Van Sciver named CSA fellow
Dr. Steven Van Sciver, the John Gorrie Professor of Mechanical Engineering at the Florida A&M University-Florida State University College of Engineering and a founding member of the National High Magnetic Field Laboratory, became just the fifth member of the Cryogenic Society of America to be named a fellow.
Larbalestier receives Lifetime Achievement Award
Dr. David Larbalestier, Director of Florida State University's Applied Superconductivity Center, received the Lifetime Achievement Award from the International Cryogenic Materials Conference (ICMC) on July 17 in Chattanooga.
Dr. Lucio Rossi receives IEEE Council on Superconductivity Award
The prestigious IEEE Council on Superconductivity award for continuing and significant contributions in the field of applied superconductivity was awarded to Dr. Lucio Rossi of CERN for his "significant and sustained contributions" on large scale applications.
ADVERTISEMENT
Refrigerators and Liquefiers
Two of the most common terms used in cryogenics are “refrigerator” and “liquefier.” These terms describe similar and, as will be seen, in some cases identical components. A refrigerator provides cooling (that is, absorbs heat) at cryogenic temperatures. Refrigerators typically put a working fluid (such as helium) through one of...
Air Separation
Air separation is one of the largest, as well as earliest, industrial applications of cryogenics. In this process, cryogenic temperatures are used to separate air into its constituent gases: nitrogen (78.08%), oxygen (20.95%), argon (0.93%) and carbon dioxide (0.3%). Trace gases such as krypton, neon, xenon and helium total far...
Coefficient of Performance and Figure of Merit
The coefficient of performance (COP) is used to describe the effectiveness of refrigerators, including those operating at cryogenic temperatures. The COP is defined as the amount of heat removed at the cryogenic operating temperature of the refrigerator divided by the amount of work that must be applied to remove the...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Any experience with G-10 in an extremely cold environment?
I have a cryostat with closed cycle cryocooler attached. The case is aluminum with a G-10 spacer between the case and a stainless steel bellows that supports the cryocooler.
Cryogenic sealant for LNG fueled buses?
Where can I find a cryogenic sealant for my LNG fueled buses?
Material/gel/epoxy to transfer cold temperature of a cryo-box to a test article
I’m on the hunt for a material/gel/epoxy that will transfer the cold temperature of a cryo-box to a test article. The cryo-box is curved and the test article is at the same curvature. I’m looking for something to put between them to make the surface of the test article as...
Manufacture of brazed aluminum heat exchangers: need consultant
I’m seeking a consultant with experience in the manufacture of brazed aluminum heat exchangers for cryogenic applications. Is there anyone you could recommend to me?