Air Liquide DTA names Adamo Screnci Commercial Director
CSA Corporate Sustaining Member Air Liquide DTA has named Adamo Screnci Commercial Director.
ADVERTISEMENT
Linde introduces mobile hydrogen refueling unit
Linde created a mobile hydrogen refueling unit with which it is possible to refuel both with liquid hydrogen and gaseous hydrogen completely autonomous.
John Miller accepts new position at ORNL
John Miller, former director of Magnet Science and Technology (MS&T) at the National High Magnetic Field Laboratory (NHMFL), has accepted the position of magnet system team leader at the Oak Ridge National Laboratory, starting at the end of June. Both labs are CSA Corporate Sustaining Members. Mark Bird has now...
Students found dead inside deflated helium balloon
Two college students were found dead on June 4 inside a large, deflated helium balloon. Officials said the students had apparently pulled the balloon down and crawled inside it. Inhaling helium can lead to brain damage and death from lack of oxygen, according to the Compressed Gas Association.
Justin Schwartz named Editor-in-Chief
Justin Schwartz, a professor of engineering at Florida State University, has recently been named Editor-in-Chief of IEEE Transactions on Applied Superconductivity publications. Schwartz is a recipient of the CSA Roger W. Boom Award.
Cryogenics Division of SHI acquires APD Cryogenics
In February 2002, the Cryogenics Division of Sumitomo Heavy Industries (SHI), one of the most respected cryogenic companies in the world, acquired APD Cryogenics.
ADVERTISEMENT
Space Cryogenics
Space cryogenics is, somewhat obviously, the application of cryogenics to space exploration and science. The use of cryogenics in space optimizes the launching of vehicles, provides power and life support to spacecraft and is critical for many scientific observations.Space cryogenics has a number of challenges and has driven both pure...
Exergy
The science of thermodynamics plays a major role in cryogenics. It underlies the various refrigeration cycles, from Carnot to Brayton (Cold Facts Vol. 32 No. 2) and Joule-Thomson, is a fundamental part of the definition of terms such as coefficient of performance (Cold Facts Vol. 31 No. 1) and even...
Cryogenic Treatment
Cryogenic treatment is the process of cooling materials to cryogenic temperatures temporarily to improve their material properties at room temperature. This is distinct from cooling materials down to cryogenic temperatures to take advantage of phenomena such as superconductivity that only occur at cryogenic temperatures. Cryogenic treatment, sometimes also referred to...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Designing a liquid oxygen bath
I’m designing a Liquid Oxygen Bath to place composite coupons in the bath and soak 96 samples for intervals of 8 hours, 24 hours, 7 days, 21 days, 42 days, 62 days and 90 days.
School science projects involving cryogenics and metallurgy?
Can you recommend any school science projects that would involve cryogenics and metallurgy?
Metallic Salts Normally Used to Produce Ultra-Low Temperatures?
Regarding the method known as the Adiabatic Demagnetization of Paramagnetic Salts: What metallic salts are normally used to produce the ultra-low temperatures used for near-absolute-zero cryogenic research? Which salts are the most efficient? Which make the best cooling agents? And which are used most commonly by physicists? I am looking...
Specs and info on turbo expanders
I am a fourth year chemical engineering student doing a design project for the liquefaction of natural gas to DME and we are using a turbo expansion unit. I was wondering whether you would send me some specs and any additional information on turbo expanders that I could use as...