Air Liquide DTA names Adamo Screnci Commercial Director
CSA Corporate Sustaining Member Air Liquide DTA has named Adamo Screnci Commercial Director.
ADVERTISEMENT
Linde introduces mobile hydrogen refueling unit
Linde created a mobile hydrogen refueling unit with which it is possible to refuel both with liquid hydrogen and gaseous hydrogen completely autonomous.
John Miller accepts new position at ORNL
John Miller, former director of Magnet Science and Technology (MS&T) at the National High Magnetic Field Laboratory (NHMFL), has accepted the position of magnet system team leader at the Oak Ridge National Laboratory, starting at the end of June. Both labs are CSA Corporate Sustaining Members. Mark Bird has now...
Students found dead inside deflated helium balloon
Two college students were found dead on June 4 inside a large, deflated helium balloon. Officials said the students had apparently pulled the balloon down and crawled inside it. Inhaling helium can lead to brain damage and death from lack of oxygen, according to the Compressed Gas Association.
Justin Schwartz named Editor-in-Chief
Justin Schwartz, a professor of engineering at Florida State University, has recently been named Editor-in-Chief of IEEE Transactions on Applied Superconductivity publications. Schwartz is a recipient of the CSA Roger W. Boom Award.
Cryogenics Division of SHI acquires APD Cryogenics
In February 2002, the Cryogenics Division of Sumitomo Heavy Industries (SHI), one of the most respected cryogenic companies in the world, acquired APD Cryogenics.
ADVERTISEMENT
Cold Compressors
A common way to provide cooling below the normal boiling point of helium (4.2K) is to reduce the pressure above the bath of liquid helium, thus also reducing the bath’s equilibrium saturation temperature. For example, to produce a 1.8K bath of liquid helium, the saturation pressure has to be reduced...
Kapitza Conductance
Kapitza conductance refers to the heat transfer between a solid surface and a fluid that covers that surface. Fundamentally, it describes the inherent difficulty in transferring energy from a solid to the fluid covering the solid surface. This phenomenon was first observed by P. L. Kapitza in 1941 while studying...
Thermosyphons
A thermosyphon (or thermosiphon) is a device that transfers heat via natural convection in a fluid. The natural convection is driven by gravity with the colder, denser fluid flowing downhill and the warmer, less dense fluid flowing back up. Thus, thermosyphons connect an object to be cooled with a reservoir...
Cryogenic Electronics
Randall Kirschman, consulting physicist, Mountain View, California ExtElect@gmail.com Cryogenic electronics—the operation of electronic devices, circuits, and systems at cryogenic temperatures—has been a valuable technology for decades. Cryogenic electronics (also referred to as low-temperature electronics, or cold electronics) can be based on semiconductive devices, on superconductive devices, or on a combination...
Particle Physics: High Energy Physics
Cryogenics and High-Energy Physics 1. From symmetry magazine: http://www.symmetrymagazine.org/cms/?pid=1000627: Cryogenics is the study of how materials behave at temperatures near absolute zero. In high-energy particle accelerators, such frigid temperatures reduce the electrical resistance of wires in superconducting magnets, increasing the magnet strength and allowing faster particle acceleration. The same holds...
HTS Degaussing Systems
From the Spring 2009 issue of Cold Facts (Volume 25, Number 2): Thanks to a joint project by the US Navy and a number of industry partners, high temperature superconducting (HTS) technology is now at the heart of an advanced degaussing system aboard the USS Higgins at the naval station...
Magnetic Resonance Imaging
From http://www.superconductors.org: An area where superconductors can perform a life-saving function is in the field of biomagnetism. Doctors need a non-invasive means of determining what’s going on inside the human body. By impinging a strong superconductor-derived magnetic field into the body, hydrogen atoms that exist in the body’s water and...
An Issue of Pressure and Flow Rate in a Supply Tank
Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...
Using MLI on VJ Line Joints or Cryo Storage Tanks
When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...
Separated layers of ice over a pipe
I want to know that why there are different layers of ice over a pipe carrying a cryogenic fluid, each layer separated with clear marks / lines? What do these layers signify?