3D Printing, Cryogenics Create Super Soft Structures That Replicate Brain and Lungs
Imperial College London researchers have developed a new method for creating 3D structures using cryogenics and 3D printing techniques.
ADVERTISEMENT
The Kilo Is Dead. Long Live the Kilo!
An old artifact kept in a vault outside Paris is no longer the standard for the kilogram. Now, nature itself provides the definition.
Dark Energy Instrument’s Lenses See the Night Sky for the First Time
On April 1, the dome of the Mayall Telescope in Tucson AZ opened to the night sky, and starlight poured through the assembly of six large lenses that were carefully packaged and aligned for a new instrument that will launch later this year.
Advanced Superconducting Motor Experimental Demonstrator Addresses Environmental Concerns
Demaco Holland BV (CSA CSM) is lending its cryogenic expertise to the development of a rotor cryostat for the Advanced Supeconducting Motor Experimental Demonstrator, which will develop, build and test the first fully superconductive motor for aerospace applications.
Women in Cryogenics and Superconductivity 2019
CSA celebrates women in cryogenics and superconductivity. In this feature, six women in positions across the industry discuss current projects, how they entered the field and their thoughts on attracting more women to the profession.
NIST Explains the New Kelvin Definition
The definition of the kelvin (K)—the temperature unit of the International System of Units (SI), has been given a radically new definition. This redefinition was the result of 60 nations’ unanimous vote to revise the SI in November 2018.
ADVERTISEMENT
Adiabatic Demagnetization Refrigeration
Reaching temperatures below 1K requires different techniques than the various helium gas cycles found in large scale refrigeration plants and small cryocoolers. One of these techniques is Adiabatic Demagnetization Refrigeration (ADR). This technique takes advantage of the fact that the entropy of paramagnetic materials in a magnetic field is lower than...
Cryogen-Free
A cryogen is any fluid that operates at cryogenic temperatures (below roughly 150K – 120K). Using this definition, helium gas at 40K is a cryogen. Another more restrictive definition is to use cryogen to refer specifically to liquids at cryogenic temperatures. This is generally how it is used in the...
Cryostats and Cryocoolers
A cryostat is any device designed to maintain things (including fluids) at cryogenic temperatures. In general usage, cryostats tend to be passive devices rather than providing active cooling. In this usage, cryostats keep things cold by thermally isolating them from room temperature. This generally is accomplished by a combination of...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Looking for the thermal conductivity of the high density polyethylene (HDPE) between 1.9 and 10K
I am looking for the thermal conductivity of the high density polyethylene (HDPE) between 1.9 and 10K (or even up to higher temperatures). The best would be to have these data for the HDPE material which sold by the CERN shop, which has a density of 0.95 g/cm3. Pier Paolo...
What is "Alpha" cryogenic processing?
Can somebody please tell me what the “Alpha Cryogenic Process” is? How is it different from ordinary cryogenic processing? Bernd Ahne, HiFi-Tuning
Do Stirling coolers have any relation to Stirling engines?
I was just wondering, do Stirling coolers have any relation to Stirling engines?
What type of MLI should be used in LOX (VJ) lines and flex hoses?
I work for ASRC Aerospace at the Kennedy Space Center (KSC). We support NASA in ground support equipment (GSE) design. I have a question concerning the type of multilayer insulation (MLI) to use in LOX vacuum Jacketed (VJ) lines and flex hoses.