Nominations Open for New KEK Director-General
Japan's KEK, High Energy Accelerator Research Organization, has announced a worldwide search for its next Director-General, whose term will begin April 1, 2018, and last for three years.
ADVERTISEMENT
Winners Announced for 2017 Fritz London Memorial Prize
Duke University has announced recipients of its 2017 Fritz London Memorial Prize, choosing Jeevak Parpia of Cornell University and William P. Halperin and James A. Sauls, both from Northwestern University.
Boiloff Calorimetry for the Measurement of Very Low Heat Flows
The use of boiloff calorimetry to measure the effects of thermal energy (or heat) dates back to the early 1900s [1, 2]. Gas flow rates measured in evaporation—or boiloff—calorimetry enable direct calculation of quantities such as heat flux and thermal conductivity. A particularly useful approach is to use nitrogen for...
Remembering the 1987 Woodstock of Physics
Paul Michael Grant was in the room where it happened, and in this essay, he recalls the 1987 APS March Meeting known as the "Woodstock of Physics." It began when Brian Maple, of UC San Diego, took the unprecedented and ambitious step of assembling an “off the program” all night...
Women in Cryogenics and Superconductivity
CSA celebrates women in cryogenics and superconductivity. In this feature, six women in positions across the industry discuss current projects, how they entered the field and their thoughts on attracting more women to the profession.
Cryogenic Sapphire Oscillator Enhancement Improves Accuracy
Researchers from the University of Adelaide in South Australia have enhanced the Cryogenic Sapphire Oscillator, or Sapphire Clock, to allow time measurements with accuracy on the femtosecond scale. The oscillator has a five-centimeter cylinder-shaped sapphire crystal cooled to about -267°C, or about five or six degrees above absolute zero. At...
ADVERTISEMENT
Adiabatic Demagnetization Refrigeration
Reaching temperatures below 1K requires different techniques than the various helium gas cycles found in large scale refrigeration plants and small cryocoolers. One of these techniques is Adiabatic Demagnetization Refrigeration (ADR). This technique takes advantage of the fact that the entropy of paramagnetic materials in a magnetic field is lower than...
Cryogen-Free
A cryogen is any fluid that operates at cryogenic temperatures (below roughly 150K – 120K). Using this definition, helium gas at 40K is a cryogen. Another more restrictive definition is to use cryogen to refer specifically to liquids at cryogenic temperatures. This is generally how it is used in the...
Cryostats and Cryocoolers
A cryostat is any device designed to maintain things (including fluids) at cryogenic temperatures. In general usage, cryostats tend to be passive devices rather than providing active cooling. In this usage, cryostats keep things cold by thermally isolating them from room temperature. This generally is accomplished by a combination of...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Any experience with Tungsten or Tantalum metal springs in a low temp environment?
I would like to use metal springs made of Tungsten or Tantalum in low temperature environment. Does anybody have any experience with such springs? More precisely, I would like to make compression springs by rolling tungsten or tantalum wire on a rod. I expect that, typically, the spring constant will...
Standards & specifications for pipe & tube couplings
I am interested in finding out more about cryogenic applications and what standards, specifications and test methods (ASTM, etc.) are required for qualification of pipe and tube couplings.
Looking for a test house to test the static coefficient of friction under cryogenic conditions
I am looking to find a test house that is capable of testing the static coefficient of friction under cryogenic conditions. We can be flexible on most of the test parameters, including the test coupon configuration, but we’re looking for a test house that can provide the following test environment:...
Approximating pressure changes over time in cryogenic cylinders
I am an Air Resources Engineer with the California Air Resources Board (CARB). My senior management has asked me to investigate approximating pressure changes over time in cryogenic cylinders that contain LNG. So far, I have taken a stab at the problem, seeking to take a back-of-the-envelope approach (as directed...