ICEC25/ICMC2014 Held at University of Twente, the Netherlands
The 25th International Cryogenic Engineering Conference and International Cryogenic Materials Conference took place July 7-11 at the University of Twente, Enschede, the Netherlands.
ADVERTISEMENT
The 18th International Cryocooler Conference
The 18th International Cryocooler Conference was held June 9-12 in Syracuse NY at the beautiful Syracuse University campus. Conference Chairman Rich Dausman and Co-chairman Dr. Chao Wang, both of Cryomech, Inc., hosted 161 attendees, including 11 students and six retirees, representing 14 different countries.
The Future with Cryogenic Fluid Dynamics
The applications of cryogenic systems have expanded over the past 50 years into many areas of our lives. This article will discuss the likely impact of cryogenic fluid dynamics on future cryogenic systems, and hopefully inspire further research to support and expand the use of existing findings and to improve...
Discovery of Helium in Natural Gas: A Retrospective
A very interesting insight into the evolution of helium production and personal insights into the life and contributions of H. P. Cady was presented by his grandson, Dr. Ralph Cady Longsworth, retired from APD Cryogenics, in a paper entitled “100th anniversary of the discovery of helium in natural gas,” presented...
Young Faces: The Next Generation in Cryogenics, Part II
In our last issue, we debuted our third installment of Young Faces, featuring young professionals who are doing interesting things in cryogenics and superconductivity and who show promise of making a difference in their fields. Here is Part II of that story, with responses listed in order of receipt.
Superfluid Helium in Space
Many scientific observations must be done in space at cryogenic temperatures a few millidegrees to a few degrees above absolute zero (-273°C). These include observations of the behavior of superfluid helium in space and observations with instruments and millimeter-wave telescopes operating at liquid helium temperatures.
ADVERTISEMENT
Joule-Thomson Effect
The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...
Current Leads
One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...
Multilayer Insulation
Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...
Primary Standards
Elie K. Track Hypres, Inc. elie@hypres.com http://www.hypres.com/ Primary standards involve the exact definition and realization of units of measurement for various quantities, time, length, mass, voltage, resistance, current, etc. International agreements based on the latest scientific knowledge define those units, and their realizations vary depending on the unit itself. For...
Shrink Fitting
Robin A. Rhodes Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Shrink fitting, (or “compression fitting” as it is sometimes called), is a method used to insert a pin or bushing into a housing or other assembly requiring an extremely tight tolerance fit. It can be used as an alternative to...
Telecommunications
From the Winter 2004 issue of Cold Facts magazine The recent M-Calc IV — 4th Industry Assessment workshop discussing military and commercial applications for low-cost cryocoolers, held in November in San Diego, highlighted progress being made in cryogenics as applied in telecommunications. The reliability and long lifetime of projects now...
Wind Tunnels
Dr. Robert Kilgore The development of the cryogenic wind tunnel is one of many significant breakthroughs in both cryogenics and wind-tunnel technology made during the past millennium. Interest in the development of high-speed commercial and military aircraft resulted in a review of problems of flow simulation in transonic wind tunnels...
An Issue of Pressure and Flow Rate in a Supply Tank
Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...
Using MLI on VJ Line Joints or Cryo Storage Tanks
When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...
Separated layers of ice over a pipe
I want to know that why there are different layers of ice over a pipe carrying a cryogenic fluid, each layer separated with clear marks / lines? What do these layers signify?