ADVERTISEMENT

Cryocoolers to Monitor Global Surface Temperatures from Space

The Cryocooler Development and Engineering Group at Airbus Defence and Space, formerly known as Astrium, has delivered the first of two space cryocooler systems, scheduled to launch in mid-2015 on the European Space Agency’s twin Sentinel 3 satellites.

The Rebirth of CSA

In 1984, 20 years after its founding, the Cryogenic Society of America was re-incorporated in the state of Illinois under new leadership. President Romuald (Ray) Szara explained the changes in a letter to the membership quoted in Vol. 1, No. 1 of the new CSA magazine, Cold Facts.

The Birth of CSA

The Cryogenic Society of America was founded in 1964. David Carse, the first national President of CSA, traced the “history” of the newly formed body in his article “Cryo Comment,” published in Volume 1, No. 1 of the society’s journal, Cryogenic Technology.

Report on World Congress of the ISC

The 17th World Congress of the International Society of Cryosurgery was held in Bali, Indonesia, last December. At the opening ceremony, Prof. Dr. Akmal Taher, Sp.U(K), Director General of the Ministry of Health of the Republic of Indonesia, welcomed the delegates. A total of 109 delegates from four continents attended...

16th Intl. Conference on RF Superconductivity held in Paris

Ah, Paris! The City of Lights was the setting for the SRF 2013 conference, held Sept. 22-27. The conference was the latest continuation of a series started in 1980 at Karlsruhe as a small workshop, and has grown to 412 attendees, featuring an exhibition with 20 industrial exhibitors, and offering...

ADVERTISEMENT

Adiabatic Demagnetization Refrigeration

Reaching temperatures below 1K requires different techniques than the various helium gas cycles found in large scale refrigeration plants and small cryocoolers. One of these techniques is Adiabatic Demagnetization Refrigeration (ADR). This technique takes advantage of the fact that the entropy of paramagnetic materials in a magnetic field is lower than...

Cryogen-Free

A cryogen is any fluid that operates at cryogenic temperatures (below roughly 150K – 120K). Using this definition, helium gas at 40K is a cryogen. Another more restrictive definition is to use cryogen to refer specifically to liquids at cryogenic temperatures. This is generally how it is used in the...

Cryostats and Cryocoolers

A cryostat is any device designed to maintain things (including fluids) at cryogenic temperatures. In general usage, cryostats tend to be passive devices rather than providing active cooling. In this usage, cryostats keep things cold by thermally isolating them from room temperature. This generally is accomplished by a combination of...

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Specs and info on turbo expanders

I am a fourth year chemical engineering student doing a design project for the liquefaction of natural gas to DME and we are using a turbo expansion unit. I was wondering whether you would send me some specs and any additional information on turbo expanders that I could use as...

Colleges that offer cryogenic studies

Would you happen to know of any colleges in the US that offer cryogenics as a major? If not, should I major in something like biology or physics before, then branch off to the field of cryogenics? Any information that you could give me would be greatly appreciated, considering this...

Data on hardness of Indium?

Where can I find experimental data on the hardness of Indium, as a function of temperature, as well as any existing data on the thermal contact conductance of junctions containing Indium foil, also as a function of temperature?