ICARUS inaugurated at Gran Sasso National Laboratory
The Imaging Cosmic and Rare Underground Signals (ICARUS) experiment was inaugurated at the Gran Sasso National Laboratory in Italy on March 29.
ADVERTISEMENT
Lindgren chosen as Fermilab’s head of Particle Physics Division
Mike Lindgren has been appointed as the head of Fermilab's Particle Physics Division. Lindgren has been a scientist with the lab since 2004, and most recently served as acting head of the division.
Japan’s earthquake brings major science institutions to a standstill
In the wake of the March 11 earthquake that rocked Japan, major science experiments and research institutions are taking stock of the damage to their facilities and dealing with a number of setbacks.
Fermilab’s Alex Romanenko unlocks hidden secrets for improving SRF cavities
Fermilab’s Alex Romanenko recently unlocked secrets hidden beneath the mirror-smooth surface of niobium superconducting radiofrequency (SRF) cavities that may hold the key to the success of future linear colliders. Romanenko’s discovery, which was carried out as part of his doctoral thesis at Cornell University, has earned him “The Particle Accelerator...
UCLA Engineering establishes Endowed Chair in Cryogenics
UCLA Engineering has established the Traugott and Dorothea Frederking Endowed Chair in Cryogenics. The chair will support junior faculty for terms up to five years as they build their careers in areas related to cryogenics.
Lake Shore Cryotronics CEO appointed to PECSEA
Michael Swartz, CEO of Lake Shore Cryotronics, Inc., was appointed to the President's Export Council Subcommittee on Export Administration (PECSEA) by US Commerce Secretary Gary Locke earlier this month.
ADVERTISEMENT
Joule-Thomson Effect
The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...
Current Leads
One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...
Multilayer Insulation
Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Suppliers of regenerator materials
I was looking for suppliers of regenerator materials. Can you please provide a list of vendors for: • Lead spheres • Bronze screen discs • Rare earth materials and spheres Thank you in advance for any help you can provide.
Containing ice accumulation while recovering helium
We are implementing a system to recover helium from our Janis ST-500 continuous flow LHe cryostat. The recovery system uses standard 1/4″ plastic tubing, which we connect directly to the cryostat’s exhaust port. The problem with this setup is that the gas is still quite cold as it leaves the...
Looking for some advice regarding cryogenic modeling in ANSYS FEA software
I am looking for some advice regarding cryogenic modeling in ANSYS FEA software. I have been trying to use the Transient Thermal module, in workbench 14.5, to model the cooling of a device in a dilution fridge. I have approximate values for the cooling power of each plate in the...
Compensators and/or accumulators: Are they used in cryogenics?
Are compensators and/or accumulators, high or low pressure, used in cryogenics? Are they used in space?