ICARUS inaugurated at Gran Sasso National Laboratory
The Imaging Cosmic and Rare Underground Signals (ICARUS) experiment was inaugurated at the Gran Sasso National Laboratory in Italy on March 29.
ADVERTISEMENT
Lindgren chosen as Fermilab’s head of Particle Physics Division
Mike Lindgren has been appointed as the head of Fermilab's Particle Physics Division. Lindgren has been a scientist with the lab since 2004, and most recently served as acting head of the division.
Japan’s earthquake brings major science institutions to a standstill
In the wake of the March 11 earthquake that rocked Japan, major science experiments and research institutions are taking stock of the damage to their facilities and dealing with a number of setbacks.
Fermilab’s Alex Romanenko unlocks hidden secrets for improving SRF cavities
Fermilab’s Alex Romanenko recently unlocked secrets hidden beneath the mirror-smooth surface of niobium superconducting radiofrequency (SRF) cavities that may hold the key to the success of future linear colliders. Romanenko’s discovery, which was carried out as part of his doctoral thesis at Cornell University, has earned him “The Particle Accelerator...
UCLA Engineering establishes Endowed Chair in Cryogenics
UCLA Engineering has established the Traugott and Dorothea Frederking Endowed Chair in Cryogenics. The chair will support junior faculty for terms up to five years as they build their careers in areas related to cryogenics.
Lake Shore Cryotronics CEO appointed to PECSEA
Michael Swartz, CEO of Lake Shore Cryotronics, Inc., was appointed to the President's Export Council Subcommittee on Export Administration (PECSEA) by US Commerce Secretary Gary Locke earlier this month.
ADVERTISEMENT
Refrigerators and Liquefiers
Two of the most common terms used in cryogenics are “refrigerator” and “liquefier.” These terms describe similar and, as will be seen, in some cases identical components. A refrigerator provides cooling (that is, absorbs heat) at cryogenic temperatures. Refrigerators typically put a working fluid (such as helium) through one of...
Air Separation
Air separation is one of the largest, as well as earliest, industrial applications of cryogenics. In this process, cryogenic temperatures are used to separate air into its constituent gases: nitrogen (78.08%), oxygen (20.95%), argon (0.93%) and carbon dioxide (0.3%). Trace gases such as krypton, neon, xenon and helium total far...
Coefficient of Performance and Figure of Merit
The coefficient of performance (COP) is used to describe the effectiveness of refrigerators, including those operating at cryogenic temperatures. The COP is defined as the amount of heat removed at the cryogenic operating temperature of the refrigerator divided by the amount of work that must be applied to remove the...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Seeking recommendations for commercial sensors
I would like to measure vibrations in small LHe cryostats. Could anybody recommend commercial sensors which would be suitable for the purpose? I am interested in the frequency range between 1Hz and a couple of KHz, with particular attention to the low frequency side.
Estimating cost of carbon steel, pure helium storage tanks
In order to perform an indicative cost assessment of our helium cryogenic plant (still in the design phase), I need an estimation of the cost of carbon steel room temperature pure helium storage tanks. The storage pressure is 20 bar. Can anyone give me suggestions about how to estimate the...
Supplier of pressure sensor that works down to 4.2 K
In an actual experiment we would like to measure the static pressure in a cryostat in the range between one and four bar. Therefore we are looking for some (more or less) cheap pressure sensors that work in liquid helium in the pressure range up to five bar. Unfortunately all...
Looking for reference/textbook suggestions
Can you suggest some reference textbooks for practical thermodynamics applications in cryogenic fields? I need textbooks with cryogenics calculations and examples, dimensioning procedures, second principle applications in cryogenics, heat load calculations, cryogenic pump application, etc. Do such books exist? Does any similar source of information exist?