ICARUS inaugurated at Gran Sasso National Laboratory
The Imaging Cosmic and Rare Underground Signals (ICARUS) experiment was inaugurated at the Gran Sasso National Laboratory in Italy on March 29.
ADVERTISEMENT
Lindgren chosen as Fermilab’s head of Particle Physics Division
Mike Lindgren has been appointed as the head of Fermilab's Particle Physics Division. Lindgren has been a scientist with the lab since 2004, and most recently served as acting head of the division.
Japan’s earthquake brings major science institutions to a standstill
In the wake of the March 11 earthquake that rocked Japan, major science experiments and research institutions are taking stock of the damage to their facilities and dealing with a number of setbacks.
Fermilab’s Alex Romanenko unlocks hidden secrets for improving SRF cavities
Fermilab’s Alex Romanenko recently unlocked secrets hidden beneath the mirror-smooth surface of niobium superconducting radiofrequency (SRF) cavities that may hold the key to the success of future linear colliders. Romanenko’s discovery, which was carried out as part of his doctoral thesis at Cornell University, has earned him “The Particle Accelerator...
UCLA Engineering establishes Endowed Chair in Cryogenics
UCLA Engineering has established the Traugott and Dorothea Frederking Endowed Chair in Cryogenics. The chair will support junior faculty for terms up to five years as they build their careers in areas related to cryogenics.
Lake Shore Cryotronics CEO appointed to PECSEA
Michael Swartz, CEO of Lake Shore Cryotronics, Inc., was appointed to the President's Export Council Subcommittee on Export Administration (PECSEA) by US Commerce Secretary Gary Locke earlier this month.
ADVERTISEMENT
Regenerators
Regenerators or regenerative heat exchangers are a key component of cryocoolers such as pulse tube cryocoolers (Cold Facts, August 2014). Regenerator performance greatly affects the coefficient of performance of cryocoolers. Improvements in regenerator design and, in particular, regenerator materials have been an important factor in the improvement of the performance...
Pulse Tube Cryocoolers
The development of pulse tube cryocoolers has been a significant topic of research and development over the past 20 or so years. Pulse tube cryocoolers have a number of advantages over other types of cryocoolers and are now available commercially. In order to understand pulse tube cryocoolers, it’s best to...
Thermal Expansion
Thermal expansion refers to the change in size (length or volume) that a material undergoes as its temperature changes. In cryogenic systems this effect can be quite large and must be allowed for in the design. In isotropic materials, which include most engineering materials, the thermal expansion is the same...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Thermal shock on steel cylinder when dropped into liquid nitrogen
We are a research team at the University of South Florida, studying the “thermal shock” on a steel cylinder when it is dropped into liquid nitrogen. We want to make sure that the thermocouple does not get influenced by the surrounding LN2. Any advice?
Getter materials to absorb out gassed materials?
Here’s one for the scientists: We would like to sell vacuum insulated pipe for high temperature fluid applications. Are there any good getter materials that we can place in the vacuum space of our VJP to absorb outgassed materials at elevated temperatures?
Data on Carbon Fibres Reinforced Plastic at temperatures between 4 and 300K.
I am looking for data on Carbon Fibres Reinforced Plastic at temperatures between 4 and 300K. I would appreciate it if someone could give me some hints on where to find it.
Design of cryostats and suspension mechanisms for insulation and cryostat shielding
I’m looking for information about the design of cryostats and suspension mechanisms for insulation and cryostat shielding.