Cryofab goes “green” with new solar panels
Cryofab, Inc. recently announced the planned installation of more than 400 solar panels at its manufacturing and design facility in Kenilworth, NJ.
ADVERTISEMENT
Korean students visit CSA, Meyer Tool
On July 15, three undergraduate students from the Air Conditioning and Refrigeration Department at PuKyung National University visited CSA's Oak Park, Illinois office.
CSA Announces Election Results
The results are in from the recent election held by the Cryogenic Society of America.
Indium Wire Extrusion opens second manufacturing facility
Indium Wire Extrusion has announced the addition of a second manufacturing facility in Castle Rock CO.
Oxford Instruments receives orders from neutron scattering facilities
Oxford Instruments has received orders for high field superconducting magnets from two neutron scattering facilities, the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL) and the Australian Nuclear Science and Technology Organization (ANSTO).
SLAC extends lease
SLAC National Accelerator Laboratory recently signed an agreement that will allow the facility to continue operating in its current location for an additional 33 years.
ADVERTISEMENT
Dewar
A dewar is a type of cryostat named after Sir James Dewar, the researcher who first developed the concept of a vacuum insulated container with silvered walls to reflect thermal radiation. Dewar was the first to liquefy hydrogen, and he created the device to store his discovery. The thermos bottle...
Stirling and Gifford-McMahon Cryocoolers
Stirling and Gifford-McMahon (GM) cryocoolers are two of the most commonly used cryocoolers in cryogenics. Both devices have a significant industrial base and operate at a wide range of temperatures and capacities. The thermodynamic cycles for both of these cryocoolers are quite similar. The Stirling cycle consists of a compressor,...
Liquefied Natural Gas (LNG)
A significant commercial application of cryogenics is the liquefaction, transport and storage of natural gas. Liquefied Natural Gas (LNG) is generally 95 percent methane with a few percent ethane and much lower concentrations of propane and butane. LNG liquefies at 111.6 K. Unlike many applications of cryogenics, the motivation for...
History of Cryogenics
From the Fall 1999 issue of Cold Facts magazine Millennium Breakthroughs A variety of CSA members give different perspectives on the past millennium: What were the most significant breakthroughs in cryogenics during the past millennium? Prof. R.G. Scurlock, Kryos Technology, scurlock@soton.ac.uk (“Breakthrough” = way through obstacles — Oxford English Dictionary)...
Cryobiology
Andreas Sputtek Past President Society for Cryobiology sputtek@uke.uni-hamburg.de or http://www.sputtek.de/. The word cryobiology (from the Greek words “cryo” = cold, “bios” = life, and “logos” = science) literally signifies the science of life at low temperatures. In practice, this field comprises the study of any biological material or system (e.g.,...
Cryogenic Insulation
James E. Fesmire Cryogenics Test Laboratory NASA Kennedy Space Center james.e.fesmire@nasa.gov Introduction In today’s world, the use of cryogenics and low-temperature refrigeration is taking a more and more significant role. From the food industry, transportation, energy, and medical applications to the Space Shuttle, cryogenic liquids must be stored, handled, and...
Cryogenic Treatment of Materials
F.J. Diekman Controlled Thermal Processing, Inc. info@metal-wear.com Cryogenic Processing (also called cryogenic treatment, and incorrectly “cryogenic tempering”) is a process that uses cryogenic temperatures to modify materials to enhance their performance. Cryogenic Processing involves the slow reduction in temperature of the material to at least -300°F (-185°C) and holding the...
Looking for the thermal conductivity of the high density polyethylene (HDPE) between 1.9 and 10K
I am looking for the thermal conductivity of the high density polyethylene (HDPE) between 1.9 and 10K (or even up to higher temperatures). The best would be to have these data for the HDPE material which sold by the CERN shop, which has a density of 0.95 g/cm3. Pier Paolo...
What is "Alpha" cryogenic processing?
Can somebody please tell me what the “Alpha Cryogenic Process” is? How is it different from ordinary cryogenic processing? Bernd Ahne, HiFi-Tuning
Do Stirling coolers have any relation to Stirling engines?
I was just wondering, do Stirling coolers have any relation to Stirling engines?
What type of MLI should be used in LOX (VJ) lines and flex hoses?
I work for ASRC Aerospace at the Kennedy Space Center (KSC). We support NASA in ground support equipment (GSE) design. I have a question concerning the type of multilayer insulation (MLI) to use in LOX vacuum Jacketed (VJ) lines and flex hoses.